* Start of externalizing polygon shard detection
* Completely untested external quicksort
* Add unit test for external quicksort
* Remember to clean up temporary files
* Sort and scan the vertices
* Bring over more vertex logic
* Make nodes from vertices
* Checkpoint on switching over to global shared nodes
* Do the thing
* Revert unintended change to coalesced linestring behavior
* Take shared nodes into account in early simplification
* Let it do more sorting in memory
* Fix overnoding of collinear linestrings
* Remove duplicate nodes, since only duplicate vertices now matter
* Remember to delete temporary files
* Fix out of bounds memory access below, apparently
* Fix the actual undefined behavior
* Still running out of memory in one case. Find out where.
* Forgot the conditional
* Try again to make it not run out of memory
* Update version and changelog
When running "make test" in a pristine working copy, the "test" target
calls the "raw-tiles-test" target, which tries to execute ./tile-join.
But that binary has not been built, yet, at this point. The target fails
with an error.
Add the required binaries as dependencies to the test targets in the
Makefile. This makes sure that they are built before they are attempted
to be executed.
* Put all of this back in geometry.cpp for conflict resolution
* Stabilize line simplification to behave the same regardless of winding
* Round instead of truncating when clipping lines
* Restore non-Wagyu polygon clipping from prior to 2fdec7d2
* Make it round, not truncate, which reverts the last commit's test diffs
* Clip in floating point, not integers, which makes no difference
* Track nodes added at tile edges during clipping
* Scale geometry up before wagyu to prevent changes from precision loss
* Actually do the shared edge detection
* Fix cases where nodes were not being added at the tile boundary
* One more place I should have rounded
* Narrow down where the discrepancy comes in
* Revert "Narrow down where the discrepancy comes in"
This reverts commit 221c4c5fc0ac9a6567e091c6a94b3d87dc8ade83.
* Another attempt to narrow it down
* The discrepancy seems to be introduced in reordering. No obvious bug
* Was still truncating instead of rounding in projection
* Also makes no difference...
* Just forget that line reversal exists for a minute
* Just reversal no coalescing
* Try clipping in integers instead of floating point
* Don't simplify after coalescing if they said no simplification
* Check whether behavior is consistent with intentional simplification
* Replace more floating point with integer
* Are these three features enough to demonstrate the problem?
* Add a few more nearby borders
* All the features that touch tile 6/16/23
* Stay in integers in line simplification
* More attempts to solve failures to simplify consistently
* Fix most of the overflow errors
* Fix known cases of integer overflow
* All the tests change again
* Pull clipping and scaling code back out into clip.cpp
* Resolve the test conflicts
* Stabilize choice of which three points to keep with different windings
* Almost right, I think!
* Fix collapse of islands to shards
* Self-intersections in the same feature don't count
* Revert "Self-intersections in the same feature don't count"
This reverts commit e04b19916e.
* Don't scale down geometry if we are going to look for shared nodes
* Fix the missing multiply that was keeping simplification from happening
* Fix one more opportunity for overflow
* Somehow I deleted this test?
* Lost this test too
* Clean up debugging printfs
* Restore code sequence from main to make it reviewable
* Remove unneeded rounding
* Update documentation
* This test is no longer useful
* Back to floating point Douglas-Peucker to fix undersimplification
* Try an older ubuntu
* Revert "Try an older ubuntu"
This reverts commit 13fefacfd7.
* Log OS info
* Remove tests that are no longer needed
* Oops, did need that one after all
* Fix the arm vs x86 discrepancy?
* Try another quantization
* Cleanup from review
* Add a test for the actual purpose of this PR
* Fix tile-join crash when trying to merge empty tilesets with --overzoom
* Add an option not to reduce tiny polygons to dust at maxzoom
* Add test for prevention of tiny polygon reduction at maxzoom
* Change version number
* Dropping a 0-length feature doesn't count as dropping-as-needed
* Add an option not to reduce tiny polygons to dust at maxzoom
* Add test for prevention of tiny polygon reduction at maxzoom
* Fix accounting for tiny polygons not to include degenerate geometries
* Revert "Add test for prevention of tiny polygon reduction at maxzoom"
This reverts commit f931bbd73e.
* Revert "Add an option not to reduce tiny polygons to dust at maxzoom"
This reverts commit 03f0882bb6.
* Fix tests
* Another test that no longer has any really tiny polygons
* Oops, that broke LineString simplification
* This time for sure!
* Update changelog and version
* Add an option to extend zooms if still dropping, but with a limit
* At least when to overzoom, even if not actually doing it yet
* Refactor to give tile-join access to overzoom()
* Didn't work, but *might* have worked
* OK, it did something now
* Ah, there's the bug!
* Hook up pmtiles and dirtiles as overzooming sources
* Add command line option to enable or disable overzooming
* Add (currently broken) test of overzooming in tile-join
* Slightly more abstraction for the tile-join readers
* Factor out duplicated code
* Move construction into a constructor
* More changing accessors to methods
* Reduce magic
* Start tracking a list of the tiles at maxzoom
* I think it worked?
* Add missing #include
* Fix sequence of overzoomed tiles (Y sorts backwards for TMS)
* Don't spend memory on overzooming when we aren't going to use it
* Diff rather than cmp, in the hope of figuring out this broken test
* Keep full coordinate precision if we might extend zooms
* Try a slightly different byte limit
* Make drop-densest more consistent across tile boundaries
* Also affects this test
* Does it behave any differently if it can extend forever?
* I think the discrepancy is a thread-safety problem here
* Revert "Does it behave any differently if it can extend forever?"
This reverts commit 0dff0a0acc.
* Lost this change to the test
* This time for sure!
* Revert "Also affects this test"
This reverts commit cd1f7c2e78.
* Revert "Make drop-densest more consistent across tile boundaries"
This reverts commit 563f7d2bc2.
* Revert "Try a slightly different byte limit"
This reverts commit 2e271213d6.
* Add some more explanatory comments
* Amend the join-test to detect my current bug
* Allow overzooming to complete the zoom if it ever starts
* Forgot to correct the test
* Update changelog and version
* Cleanups from code review
* Remove version number from fixture to fix test
* Starting work on overzooming
* Factor clipping out of geometry.cpp to simplify linkage
* Pull out more geometry functions into now-badly-named clip.cpp
* Not surprisingly, there is a bug
* Found the bug
* Make indent
* Pass attributes through
* Make formatting more consistent
* Fix typos in comments
* Fix the typos better
* Add tippecanoe-overzoom to the install list
* Give overzoom a predictable exit status
* Forgot to translate to and from polygon ring closepaths
* Fix geometry collapse at z21
* Add attribute stripping; don't generate layers if they have no features
* Add docs for tippecanoe-overzoom (as it will be, not as it is)
* Change overzoom to accept input and output files as arguments
* Working on overzooming tests
* Oops
* Hook up and test the detail and buffer options, and the empty-tile case
* Also test attribute stripping
* Fix error message
* Update changelog and version
* Starting on --set-attributes
* Add a JSON form to accumulate-attribute
* Fix formatting
* Set attributes, JSON form
* Also handle setting attributes to unquoted values
* Factoring out character-mangling in the names of tests
* Rename tests for new quoting convention
* Test for JSON form of attribute setting
* Test for JSON form of attribute accumulation
* Forgot to increment the version
* Don't log progress so often during pmtiles conversion
And turn off the `catch` tests, which have bit-rotted
* Fix accidental double-multiplication-by-100
* Reenable catch
* Update changelog
* Turn off unit, which has bit-rotted
* Instrument line simplification
* Do more work in integer space
* Update tests with simplification done with more integers
* Clean up
* Update changelog
* Eradicate calls to deprecated sprintf()
* Revert "Turn off unit, which has bit-rotted"
This reverts commit 998779313f.
* Fix catch by switching to an unsigned type
* Added -fPIE as g++ 9.4.0 complained and would not link
* Prevent crash by checking for properties before dereferencing.
---------
Co-authored-by: Tim Finer <finert@pixia.com>
* Calculate a new antimeridian-adjusted bounding box
* Add antimeridian bounding box to pmtiles, dirtiles, and tile-join
* Don't take out-of-bounds latitudes into account in the adjusted bbox
* Update changelog
* Forgot to adjust tests after the last change
* Allow passing a file with a list of input files to tile-join in response to Issue 69 (https://github.com/felt/tippecanoe/issues/69)
* Do not print usage if -r is specified without a commandline readfrom file
* Add test for -r option to tile-join
* Remove the concept of "separate metadata"
This was an extra level of attribute indirection (features point
to metadata records which point to key and value strings) which was
intended to reduce the size of temporary storage for features with
large numbers of attributes that were also spread across large numbers
of tiles at maxzoom.
For other kinds of features, the extra indirection slowed things down
instead, and, especially when maxzoom guessing was being used, many more
features were having their metadata externalized than could actually
benefit from it.
* Shave a few bytes off temporary files by using more unsigned integers
* Flush stderr after logging progress
* Revert "Shave a few bytes off temporary files by using more unsigned integers"
This reverts commit eef29084ec.
* Limit the size of the string pools and trees to fit in memory
* Add missing #include
* Move the string pool and search tree from mmap to allocated memory
* Sort in allocated rather than mapped memory too
* Also use pread instead of mapping to read in the data to sort
* When the pool gets too big, switch to just the file, not memory
* Switch string pool from memory to disk when memory is 10% full
* Add to-memory versions of the serialization functions
* Crashy work in progress toward compression
* Fix the pointer bug that was causing the crash
* Serialize features into memory rather than straight to disk
* Compress individual features in the temporary files
* Don't need to store the length of the geometry
* Remove per-feature compression; move minzoom back into the object
* Start adding a stream compressor object
* Track file position within fwrite_check()
* Add compressed stream writer functions
* Pull the writing of the serialized feature out to the callers
* Starting toward compression again from a different point
* Hook up more compression functions
* Remove unused code from the other day
* Make enough deflate calls to flush out all the buffered data
* Start on decompression
* Tile number is uncompressed, tile content is compressed
* Work on alternating compressed and uncompressed in decompression
* Closer, but still doesn't work
* Sort of works
* Works until we get to concatenated tiles
* More attempts that don't work
* One bug down
* It made a tileset!
* Handle nonzero initial zooms
* Fix seeking within compressed feature streams
* Tests pass!
* Remove debug spew
* Oops: remember to delete the temporary files so they don't hang around
* Test that fails with the current compression code
* Properly account for bytes read while closing the compressed stream
* Limit the number of warnings about bad label points
* A little more armor when closing decompression
* This time for sure
* A different, less fragile, test that failed previously with compression
* Move feature stream compression to its own file
* Remove now-unused code to deserialize from a file
* Forgot to add the new files
* Remove a little debugging logging
* Add a couple of comments on what it means to be within decompression
* Fix indentation
* Update changelog. Remove stray debugging comment.
* Back out the slow search for other small features when dropping features
* Actually, *do* look for small features still when coalescing
* Update changelog
* Avoid placing polygon labels in holes
* Traverse vertices in hilbert order to find potential label points
* Update test to reflect new label placements
* Sorting by Y coordinate is better and easier than Hilbert order
* Give a bonus for being near the center of mass
* Make label points a little more border-shy
* Tall places, not just wide places; border lines, not just border points
* Clean up
* Try diagonals through the features too
* Limit the search for label points to prevent slowing down too much
* At this point the center of mass bonus is doing more harm than good
* Forgot to update test
* Round coordinates instead of truncating them
* Update all the tests for coordinate rounding changes
* Curses, integer division still truncates
* Fix tests
* Also round instead of shifting when looking for no-op linetos
* Should I worry that the same change for moveto doesn't change any tests?
* Also round instead of shifting when scaling down to maxzoom resolution
* Replace another explicit shift, for origin point
* Round instead of shift when writing clipped geometries to the next zoom
* Fix low-zoom gridding and smaller-than-a-pixel checks
* Don't guess an excessively large maxzoom when there is only one feature
* Add a test for guessing the maxzoom of a single point
* Explicitly sort by index if no other order distinguishes features
* Another affected test
* Set base zoom if requested as part of maxzoom guessing
* Add a test for guessing the maxzoom of a single point
* Don't guess an excessively large maxzoom when there is only one feature
* Update changelog
* add pmtiles.hpp from github.com/protomaps/PMTiles [#10]
* tippecanoe main writes pmtiles output. [#10]
* detect output format using suffix
* after mbtiles is done writing, replace with pmtiles based on map/image tables.
* add method to write_json for writing json sub-object.
* tippecanoe-decode reads pmtiles input. [#10]
* tile-join reads and writes pmtiles. [#10]
* pmtiles test suite for decode and tile-join [#10]
* add base GitHub CI action for compiling and test suite.
* update pmtiles.hpp with z>15 fix
* Fix some ordering problems with pmtiles decode
* Pmtiles should also pass the raw tiles tests
* Eradicate spaces from tileset metadata JSON fields
* Eradicate spaces from more test fixtures
* Update more tests
* Pmtiles tests pass now too
* Remove unnecessary sort (and make indent)
* Update changelog
* The allow-existing test for pmtiles needs -o, not -e
* Declare --allow-existing to be unsupported for pmtiles.
It was always a bad idea even for mbtiles.
Co-authored-by: Brandon Liu <bdon@bdon.org>
* Progress toward making a tileset metadata structure
* Write metadata from structure to mbtiles
* Write dirtiles metadata.json from metadata structure
* Update changelog
Erica Fischer