mirror of
https://github.com/felt/tippecanoe.git
synced 2026-10-02 08:25:40 +02:00
Erica FischerandClaude Opus 5
e6e1ec3263
* Generate the usage message of each tool from its long_options
The usage messages of tile-join, tippecanoe-overzoom,
tippecanoe-json-tool, tippecanoe-decode, and tippecanoe-enumerate were
hand-written lists of options that had drifted years out of date, since
nothing tied them to the options that are really accepted. Move the
option-list printing that tippecanoe already does into a shared
print_usage(), and use it in all the tools, so that the message is
derived from the same long_options table that getopt_long() gets and
can't fall behind it again.
The tables now carry section headings, as tippecanoe's does, and the
options that were only reachable by their short names (tile-join's -O,
-b, -R, and -r among them) are listed for the first time.
Also state the non-option arguments the way each tool really treats
them: tile-join takes source tilesets unless --read-from names a file to
read them from, tippecanoe-decode takes a tileset either alone or with a
zoom/x/y, tippecanoe-json-tool reads standard input when no files are
named, and tippecanoe-overzoom's two forms are the ones its argument
parsing recognizes. tippecanoe-overzoom now reports the missing -o
instead of passing NULL to fopen(), and tippecanoe-enumerate goes
through getopt_long() so that it will pick up any options added later.
The shared getopt_string() replaces the identical loop that four of the
tools each had for building the short option string, and strip_usage_headings()
the one for dropping the headings before getopt_long() sees them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016frkRY1xXtiWjxYuCJ8vZY
* Print the usage message when tippecanoe is run with no arguments
Running `tippecanoe` with nothing at all reported the missing output
file, which is true but is not what someone who typed the bare command
needs to know. Check for the empty command line before parsing and print
the general usage message instead, and leave the specific complaint for
the case where an input file was named but an output file wasn't.
To make the message reachable from there, the options table and the
usage printing move out of main() into a usage() function, as in the
other tools.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016frkRY1xXtiWjxYuCJ8vZY
* Address review: alternation, the dead tile-join option, and --version
Four fixes from review of the generated usage messages:
* `--output` and `--output-to-directory` are one-of, not one required and
one optional, in both tippecanoe and tile-join. A `usage_required_option`
can now name an alternation that it belongs to, and the options in one
are listed together as `(--output=... | --output-to-directory=...)`,
which is what the runtime check enforces.
* tile-join's `--use-attribute-for-id` has had no implementation since
533e000 removed it; only the table entry was left behind, so the option
parsed and then exited with "Unrecognized option". Generating the usage
message from the table turned that into a documented option that doesn't
work, so remove the leftover entry too.
* `--version` was grouped under "Progress indicator", in the options table
and in the README both. Give it a heading of its own now that the
headings are something users see.
* print_usage() left `width` holding the length of the last synopsis line,
and only got away with it because every table so far begins with a
heading, which resets it. Start the option list on a line of its own
instead of depending on that.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016frkRY1xXtiWjxYuCJ8vZY
---------
Co-authored-by: Claude <noreply@anthropic.com>
603 lines
53 KiB
Makefile
603 lines
53 KiB
Makefile
PREFIX ?= /usr/local
|
|
MANDIR ?= $(PREFIX)/share/man/man1/
|
|
BUILDTYPE ?= Release
|
|
BUILD_INFO ?=
|
|
SHELL = /bin/sh
|
|
|
|
|
|
# inherit from env if set
|
|
CC := $(CC)
|
|
CXX := $(CXX)
|
|
CFLAGS := $(CFLAGS) -fPIE -DBUILD_INFO=$(BUILD_INFO)
|
|
CXXFLAGS := $(CXXFLAGS) -std=c++17 -fPIE -DBUILD_INFO=$(BUILD_INFO)
|
|
LDFLAGS := $(LDFLAGS)
|
|
WARNING_FLAGS := -Wall -Wshadow -Wsign-compare -Wextra -Wunreachable-code -Wuninitialized -Wshadow
|
|
RELEASE_FLAGS := -O3 -DNDEBUG
|
|
DEBUG_FLAGS := -O0 -DDEBUG -fno-inline-functions -fno-omit-frame-pointer
|
|
|
|
|
|
OS := $(shell uname -s)
|
|
ifeq ($(OS),FreeBSD)
|
|
ADVSHELL = /usr/local/bin/bash
|
|
else
|
|
ADVSHELL = /bin/bash
|
|
endif
|
|
|
|
|
|
ifeq ($(BUILDTYPE),Release)
|
|
FINAL_FLAGS := -g $(WARNING_FLAGS) $(RELEASE_FLAGS)
|
|
else
|
|
FINAL_FLAGS := -g $(WARNING_FLAGS) $(DEBUG_FLAGS)
|
|
endif
|
|
|
|
all: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join unit tippecanoe-json-tool tippecanoe-overzoom
|
|
|
|
docs: man/tippecanoe.1
|
|
|
|
install: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join tippecanoe-json-tool tippecanoe-overzoom
|
|
mkdir -p $(PREFIX)/bin
|
|
mkdir -p $(MANDIR)
|
|
cp tippecanoe $(PREFIX)/bin/tippecanoe
|
|
cp tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-enumerate
|
|
cp tippecanoe-decode $(PREFIX)/bin/tippecanoe-decode
|
|
cp tippecanoe-json-tool $(PREFIX)/bin/tippecanoe-json-tool
|
|
cp tippecanoe-overzoom $(PREFIX)/bin/tippecanoe-overzoom
|
|
cp tile-join $(PREFIX)/bin/tile-join
|
|
cp man/tippecanoe.1 $(MANDIR)/tippecanoe.1
|
|
|
|
uninstall:
|
|
rm $(PREFIX)/bin/tippecanoe $(PREFIX)/bin/tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-decode $(PREFIX)/bin/tile-join $(MANDIR)/tippecanoe.1 $(PREFIX)/bin/tippecanoe-json-tool
|
|
|
|
man/tippecanoe.1: README.md
|
|
md2man-roff README.md > man/tippecanoe.1
|
|
|
|
PG=
|
|
|
|
H = $(wildcard *.h) $(wildcard *.hpp)
|
|
C = $(wildcard *.c) $(wildcard *.cpp)
|
|
|
|
INCLUDES = -I/usr/local/include -I. -Iclipper2/include
|
|
LIBS = -L/usr/local/lib
|
|
|
|
tippecanoe: geojson.o jsonpull/jsonpull.o tile.o pool.o mbtiles.o geometry.o projection.o memfile.o mvt.o serial.o main.o platform.o text.o dirtiles.o pmtiles_file.o plugin.o read_json.o write_json.o geobuf.o flatgeobuf.o evaluator.o geocsv.o csv.o geojson-loop.o json_logger.o visvalingam.o compression.o clip.o sort.o attribute.o thread.o shared_borders.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-enumerate: enumerate.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lsqlite3
|
|
|
|
tippecanoe-decode: decode.o projection.o mvt.o write_json.o text.o jsonpull/jsonpull.o dirtiles.o pmtiles_file.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3
|
|
|
|
tile-join: tile-join.o platform.o projection.o mbtiles.o mvt.o memfile.o dirtiles.o jsonpull/jsonpull.o text.o evaluator.o csv.o write_json.o pmtiles_file.o clip.o attribute.o thread.o read_json.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-json-tool: jsontool.o jsonpull/jsonpull.o csv.o text.o geojson-loop.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
unit: unit.o text.o sort.o mvt.o projection.o clip.o attribute.o jsonpull/jsonpull.o evaluator.o read_json.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-overzoom: overzoom.o mvt.o clip.o evaluator.o jsonpull/jsonpull.o text.o attribute.o read_json.o projection.o read_json.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
-include $(wildcard *.d)
|
|
|
|
%.o: %.c
|
|
$(CC) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CFLAGS) -c -o $@ $<
|
|
|
|
%.o: %.cpp
|
|
$(CXX) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CXXFLAGS) -c -o $@ $<
|
|
|
|
clean:
|
|
rm -f ./tippecanoe ./tippecanoe-* ./tile-join ./unit *.o *.d */*.o */*.d tests/**/*.mbtiles tests/**/*.check
|
|
|
|
indent:
|
|
clang-format -i -style="{BasedOnStyle: Google, IndentWidth: 8, UseTab: Always, AllowShortIfStatementsOnASingleLine: false, ColumnLimit: 0, ContinuationIndentWidth: 8, SpaceAfterCStyleCast: true, IndentCaseLabels: false, AllowShortBlocksOnASingleLine: false, AllowShortFunctionsOnASingleLine: false, SortIncludes: false}" $(filter-out flatgeobuf.cpp,$(C)) $(H) jsonpull/*.[ch]
|
|
|
|
TESTS = $(wildcard tests/*/out/*.json)
|
|
SPACE = $(NULL) $(NULL)
|
|
|
|
test: tippecanoe tippecanoe-decode $(addsuffix .check,$(TESTS)) raw-tiles-test parallel-test pbf-test join-test enumerate-test decode-test join-filter-test unit json-tool-test allow-existing-test csv-test layer-json-test pmtiles-test decode-pmtiles-test overzoom-test flatgeobuf-test
|
|
./unit
|
|
|
|
suffixes = json json.gz
|
|
|
|
# Work around Makefile and filename punctuation limits:
|
|
# _ for argument-separator space
|
|
# %20 for quoted space
|
|
# %22 for quoted quote
|
|
# %2f for /
|
|
# %3a for :
|
|
# %5f for _
|
|
# %7b for {
|
|
|
|
testargs = \
|
|
$(subst %20,' ',\
|
|
$(subst %22,'"',\
|
|
$(subst %3a,:,\
|
|
$(subst %2f,/,\
|
|
$(subst %7b,'{',\
|
|
$(subst %5f,'_',\
|
|
$(subst _, ,$(1))))))))
|
|
|
|
%.json.check:
|
|
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.check,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix)))) < /dev/null
|
|
./tippecanoe-decode -x generator $@.mbtiles > $@.out
|
|
cmp $@.out $(patsubst %.check,%,$@)
|
|
rm $@.out $@.mbtiles
|
|
|
|
# Don't test overflow with geobuf, because it fails (https://github.com/mapbox/geobuf/issues/87)
|
|
# Don't test stringids with geobuf, because it fails
|
|
nogeobuf = tests/overflow/out/-z0.json $(wildcard tests/stringid/out/*.json)
|
|
geobuf-test: tippecanoe-json-tool $(addsuffix .checkbuf,$(filter-out $(nogeobuf),$(TESTS)))
|
|
|
|
# For quicker address sanitizer build, hope that regular JSON parsing is tested enough by parallel and join tests
|
|
fewer-tests: tippecanoe tippecanoe-decode geobuf-test raw-tiles-test parallel-test pbf-test join-test enumerate-test decode-test join-filter-test unit
|
|
|
|
# XXX Use proper makefile rules instead of a for loop
|
|
%.json.checkbuf:
|
|
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json); do ./tippecanoe-json-tool -w $$i | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
|
|
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json.gz); do gzip -dc $$i | ./tippecanoe-json-tool -w | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
|
|
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.checkbuf,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(addsuffix .geobuf,$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))) < /dev/null
|
|
./tippecanoe-decode -x generator $@.mbtiles | sed 's/checkbuf/check/g' | sed 's/\.geobuf//g' > $@.out
|
|
cmp $@.out $(patsubst %.checkbuf,%,$@)
|
|
rm $@.out $@.mbtiles
|
|
|
|
parallel-test: $(eval SHELL:=$(ADVSHELL))
|
|
mkdir -p tests/parallel
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$k = rand(1); $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { \"yes\": \"no\", \"who\": 1, \"$$k\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in1.json
|
|
perl -e 'for ($$i = 0; $$i < 300000; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in2.json
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in3.json
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { }, \"tippecanoe\": { \"layer\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in4.json
|
|
echo -n "" > tests/parallel/empty1.json
|
|
echo "" > tests/parallel/empty2.json
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
|
|
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-pipe.mbtiles
|
|
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipe.mbtiles
|
|
cat tests/parallel/in[1234].json | sed 's/^/@/' | tr '@' '\036' | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/implicit-pipe.mbtiles
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipes.mbtiles <(cat tests/parallel/in1.json) <(cat tests/parallel/empty1.json) <(cat tests/parallel/empty2.json) <(cat tests/parallel/in2.json) /dev/null <(cat tests/parallel/in3.json) <(cat tests/parallel/in4.json)
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-file.mbtiles > tests/parallel/linear-file.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-file.mbtiles > tests/parallel/parallel-file.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-pipe.mbtiles > tests/parallel/linear-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipe.mbtiles > tests/parallel/parallel-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/implicit-pipe.mbtiles > tests/parallel/implicit-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipes.mbtiles > tests/parallel/parallel-pipes.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-file.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/linear-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/implicit-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipes.json
|
|
rm tests/parallel/*.mbtiles tests/parallel/*.json
|
|
|
|
raw-tiles-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -e tests/raw-tiles/raw-tiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles.json.check
|
|
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
|
|
# Test that -z and -Z work in tippecanoe-decode
|
|
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles-z67.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
|
|
# Test that -z and -Z work in tile-join
|
|
./tile-join -q -f -Z6 -z7 -e tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67 > tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
|
|
rm -rf tests/raw-tiles/raw-tiles tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
# Test that metadata.json is created even if all features are clipped away
|
|
./tippecanoe -q -f -e tests/raw-tiles/nothing tests/raw-tiles/nothing.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/nothing > tests/raw-tiles/nothing.json.check
|
|
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
|
|
rm -r tests/raw-tiles/nothing tests/raw-tiles/nothing.json.check
|
|
|
|
pmtiles-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -o tests/pmtiles/hackspots.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/pmtiles/hackspots.pmtiles > tests/pmtiles/hackspots.json.check
|
|
cmp tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.json
|
|
# Test generating pmtiles first and then converting to mbtiles with tile-join.
|
|
./tile-join -q -f -pC -o tests/pmtiles/joined.mbtiles tests/pmtiles/hackspots.pmtiles
|
|
./tippecanoe-decode -x generator tests/pmtiles/joined.mbtiles > tests/pmtiles/joined.json.check
|
|
cmp tests/pmtiles/joined.json.check tests/pmtiles/joined.json
|
|
rm -r tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.pmtiles
|
|
|
|
# Test generating mbtiles first and then converting to pmtiles with tile-join. (Changes bounds)
|
|
./tippecanoe -q -f -o tests/pmtiles/hackspots.mbtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tile-join -q -f -pC -o tests/pmtiles/joined.pmtiles tests/pmtiles/hackspots.mbtiles
|
|
|
|
# decode changes order (ZXY vs TMS order)
|
|
./tippecanoe-decode -x generator tests/pmtiles/joined.pmtiles > tests/pmtiles/joined_reordered.json.check
|
|
cmp tests/pmtiles/joined_reordered.json.check tests/pmtiles/joined_reordered.json
|
|
rm -r tests/pmtiles/joined_reordered.json.check tests/pmtiles/hackspots.mbtiles tests/pmtiles/joined.pmtiles
|
|
|
|
# From raw-tiles-test:
|
|
./tippecanoe -q -f -o tests/raw-tiles/raw-tiles.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles.json.check
|
|
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
|
|
# Test that -z and -Z work in tippecanoe-decode
|
|
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
|
|
# Test that -z and -Z work in tile-join
|
|
./tile-join -q -f -Z6 -z7 -o tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.pmtiles
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
|
|
rm -rf tests/raw-tiles/raw-tiles.pmtiles tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
# Test that metadata.json is created even if all features are clipped away
|
|
./tippecanoe -q -f -o tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/nothing.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/nothing.json.check
|
|
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
|
|
rm -r tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.json.check
|
|
|
|
decode-test: tippecanoe tippecanoe-decode
|
|
mkdir -p tests/muni/decode
|
|
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.mbtiles tests/muni/*.json
|
|
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.integer.json.check
|
|
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.fraction.json.check
|
|
./tippecanoe-decode -x generator -c tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.pipeline.json.check
|
|
./tippecanoe-decode -x generator tests/muni/decode/multi.mbtiles 11 327 791 > tests/muni/decode/multi.mbtiles.onetile.json.check
|
|
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.stats.json.check
|
|
cmp tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles.json
|
|
cmp tests/muni/decode/multi.mbtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
|
|
cmp tests/muni/decode/multi.mbtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
|
|
cmp tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
|
|
cmp tests/muni/decode/multi.mbtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
|
|
cmp tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
|
|
rm -f tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.onetile.json.check
|
|
|
|
decode-pmtiles-test: tippecanoe tippecanoe-decode
|
|
mkdir -p tests/muni/decode
|
|
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.pmtiles tests/muni/*.json
|
|
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.json.check
|
|
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.integer.json.check
|
|
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.fraction.json.check
|
|
./tippecanoe-decode -x generator -c tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.pipeline.json.check
|
|
./tippecanoe-decode -x generator tests/muni/decode/multi.pmtiles 11 327 791 | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.onetile.json.check
|
|
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.stats.json.check
|
|
cmp tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.mbtiles.json
|
|
cmp tests/muni/decode/multi.pmtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
|
|
cmp tests/muni/decode/multi.pmtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
|
|
cmp tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
|
|
cmp tests/muni/decode/multi.pmtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
|
|
cmp tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
|
|
rm -f tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.pmtiles tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.pmtiles.onetile.json.check
|
|
|
|
pbf-test: tippecanoe-decode
|
|
./tippecanoe-decode -x generator tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.vector.pbf.out
|
|
cmp tests/pbf/11-328-791.json tests/pbf/11-328-791.vector.pbf.out
|
|
rm tests/pbf/11-328-791.vector.pbf.out
|
|
./tippecanoe-decode -x generator -s EPSG:3857 tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.3857.vector.pbf.out
|
|
cmp tests/pbf/11-328-791.3857.json tests/pbf/11-328-791.3857.vector.pbf.out
|
|
rm tests/pbf/11-328-791.3857.vector.pbf.out
|
|
|
|
enumerate-test: tippecanoe tippecanoe-enumerate
|
|
./tippecanoe -q -z5 -f -o tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
|
|
./tippecanoe-enumerate tests/ne_110m_admin_0_countries/out/enum.mbtiles > tests/ne_110m_admin_0_countries/out/enum.check
|
|
cmp tests/ne_110m_admin_0_countries/out/enum.check tests/ne_110m_admin_0_countries/out/enum
|
|
rm tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/out/enum.check
|
|
|
|
overzoom-test: tippecanoe-overzoom
|
|
# Basic operation
|
|
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
|
|
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
|
|
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
|
|
# Make sure feature order is stable
|
|
# Large -b20 tile buffer to prevent altering the geometries by clipping
|
|
./tippecanoe-overzoom -b20 --preserve-input-order -o tests/pbf/11-327-791-out.pbf tests/pbf/11-327-791.pbf 11/327/791 11/327/791
|
|
./tippecanoe-decode tests/pbf/11-327-791.pbf 11 327 791 > tests/pbf/11-327-791.json
|
|
./tippecanoe-decode tests/pbf/11-327-791-out.pbf 11 327 791 > tests/pbf/11-327-791-out.json
|
|
cmp tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json
|
|
rm tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json tests/pbf/11-327-791-out.pbf
|
|
# Basic operation, multiple input form
|
|
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791
|
|
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
|
|
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
|
|
# Multiple inputs, no compression
|
|
./tippecanoe-overzoom --no-tile-compression -o tests/pbf/13-1310-3166-ne.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791 tests/pbf/0-0-0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/13-1310-3166-ne.pbf 13 1310 3166 > tests/pbf/13-1310-3166-ne.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166-ne.pbf.json.check tests/pbf/13-1310-3166-ne.pbf.json
|
|
rm tests/pbf/13-1310-3166-ne.pbf tests/pbf/13-1310-3166-ne.pbf.json.check
|
|
# Different detail and buffer, and attribute stripping
|
|
./tippecanoe-overzoom -d8 -b30 -y NAME -y name -y scalerank -o tests/pbf/13-1310-3166-8-30.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
|
|
./tippecanoe-decode tests/pbf/13-1310-3166-8-30.pbf 13 1310 3166 > tests/pbf/13-1310-3166-8-30.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166-8-30.pbf.json.check tests/pbf/13-1310-3166-8-30.pbf.json
|
|
rm tests/pbf/13-1310-3166-8-30.pbf tests/pbf/13-1310-3166-8-30.pbf.json.check
|
|
# No features in child tile
|
|
./tippecanoe-overzoom -o tests/pbf/14-2616-6331.pbf tests/pbf/11-327-791.pbf 11/327/791 14/2616/6331
|
|
cmp tests/pbf/14-2616-6331.pbf /dev/null
|
|
rm tests/pbf/14-2616-6331.pbf
|
|
# Thinning
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 9 of them survive as the best of each cluster of 30
|
|
# ./tippecanoe -z1 -r30 --retain-points-multiplier 30 -f -e out.dir tests/ne_110m_populated_places/in.json
|
|
# cp out.dir/0/0/0.pbf tests/pbf/0-0-0-pop.pbf
|
|
./tippecanoe-overzoom -y NAME -m -o tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-filtered.pbf 0 0 0 > tests/pbf/0-0-0-pop-filtered.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-filtered.pbf.json.check tests/pbf/0-0-0-pop-filtered.pbf.json
|
|
rm tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop-filtered.pbf.json.check
|
|
# Thinning with accumulation
|
|
./tippecanoe-overzoom -y NAME -m --accumulate-attribute NAME:comma -o tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-accum.pbf 0 0 0 > tests/pbf/0-0-0-pop-accum.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-accum.pbf.json.check tests/pbf/0-0-0-pop-accum.pbf.json
|
|
rm tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop-accum.pbf.json.check
|
|
# Filtering
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 27 of them match the filter and are retained
|
|
./tippecanoe-overzoom -y NAME -j'{"*":["==","SCALERANK",0]}' -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
|
|
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
# Same filter test, but reading the filter from a file
|
|
./tippecanoe-overzoom -y NAME -J tests/pbf/scalerank-0-filter.json -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
|
|
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
# Filtering with multiplier
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 8 features survive into the output, from 9 clusters of 30
|
|
./tippecanoe-overzoom -y NAME -y SCALERANK -j'{"*":["==","SCALERANK",0]}' -m -o tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-filter-mult.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult.pbf.json.check
|
|
cmp tests/pbf/0-0-0-filter-mult.pbf.json.check tests/pbf/0-0-0-filter-mult.pbf.json
|
|
rm tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-filter-mult.pbf.json.check
|
|
# Filtering with multiplier and preserve-input-order
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
./tippecanoe-overzoom -y NAME -y SCALERANK -y LATITUDE -j'{"*":[">","LATITUDE",40]}' -m --preserve-input-order -o tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-filter-mult-order.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult-order.pbf.json.check
|
|
cmp tests/pbf/0-0-0-filter-mult-order.pbf.json.check tests/pbf/0-0-0-filter-mult-order.pbf.json
|
|
rm tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-filter-mult-order.pbf.json.check
|
|
# Test that overzooming with a multiplier exactly reverses the effect of tiling with a multiplier
|
|
./tippecanoe -q -z5 --preserve-point-density-threshold 8 --retain-points-multiplier 3 -f -e tests/muni/out/out.dir tests/muni/muni.json
|
|
./tippecanoe -q -z5 --preserve-point-density-threshold 8 -f -o tests/muni/out/out.mbtiles tests/muni/muni.json
|
|
./tippecanoe-overzoom -m -o tests/muni/out/out.dir/000.pbf tests/muni/out/out.dir/0/0/0.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/muni/out/out.mbtiles 0 0 0 > tests/muni/out/out.dir/direct.json
|
|
./tippecanoe-decode tests/muni/out/out.dir/000.pbf 0 0 0 > tests/muni/out/out.dir/overzoomed.json
|
|
cmp tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
|
|
rm -rf tests/muni/out/out.dir tests/muni/out/out.mbtiles tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
|
|
# Tiny polygon reduction
|
|
./tippecanoe-overzoom --line-simplification=5 --tiny-polygon-size=50 -o tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/countries-0-0-0.pbf.out 0 0 0 > tests/pbf/countries-0-0-0.pbf.out.json.check
|
|
cmp tests/pbf/countries-0-0-0.pbf.out.json.check tests/pbf/countries-0-0-0.pbf.out.json
|
|
rm tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf.out.json.check
|
|
# Deduplication by feature ID
|
|
./tippecanoe -z0 -f -e tests/pbf/1.json.dir -l layer tests/pbf/1.json
|
|
./tippecanoe -z0 -f -e tests/pbf/2.json.dir -l layer tests/pbf/2.json
|
|
./tippecanoe-overzoom -b0 -o tests/pbf/merged-nodedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/merged-nodedup.pbf 1 1 0 > tests/pbf/merged-nodedup.pbf.json.check
|
|
cmp tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-nodedup.pbf.json
|
|
./tippecanoe-overzoom -b0 --deduplicate-by-id -o tests/pbf/merged-dedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/merged-dedup.pbf 1 1 0 > tests/pbf/merged-dedup.pbf.json.check
|
|
cmp tests/pbf/merged-dedup.pbf.json.check tests/pbf/merged-dedup.pbf.json
|
|
rm -r tests/pbf/1.json.dir tests/pbf/2.json.dir tests/pbf/merged-nodedup.pbf tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-dedup.pbf.json.check
|
|
|
|
join-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -z12 -o tests/join-population/tabblock_06001420.mbtiles -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur tests/join-population/macarthur.json
|
|
./tile-join -q -f -Z6 -z9 -o tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9.mbtiles > tests/join-population/macarthur-6-9.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles.json
|
|
./tile-join -q -f -Z6 -z9 -X -o tests/join-population/macarthur-6-9-exclude.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9-exclude.mbtiles > tests/join-population/macarthur-6-9-exclude.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles.json
|
|
rm -f tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles
|
|
./tippecanoe -q -f -d10 -D10 -Z9 -z11 -o tests/join-population/macarthur2.mbtiles -l macarthur tests/join-population/macarthur2.json
|
|
./tile-join --quiet --force -o tests/join-population/joined.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force -o tests/join-population/joined-null.mbtiles --empty-csv-columns-are-null -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --no-tile-stats -o tests/join-population/joined-no-tile-stats.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-attributes-limit=1 -o tests/join-population/joined-tile-stats-attributes-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-sample-values-limit=1 -o tests/join-population/joined-tile-stats-sample-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-values-limit=1 -o tests/join-population/joined-tile-stats-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join -q -f -i -o tests/join-population/joined-i.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join -q -f -o tests/join-population/merged.mbtiles tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined.mbtiles > tests/join-population/joined.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-null.mbtiles > tests/join-population/joined-null.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-no-tile-stats.mbtiles > tests/join-population/joined-no-tile-stats.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-attributes-limit.mbtiles > tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-values-limit.mbtiles > tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-sample-values-limit.mbtiles > tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/joined-i.mbtiles > tests/join-population/joined-i.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/merged.mbtiles > tests/join-population/merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/windows.mbtiles > tests/join-population/windows.mbtiles.json.check
|
|
cmp tests/join-population/joined.mbtiles.json.check tests/join-population/joined.mbtiles.json
|
|
cmp tests/join-population/joined-null.mbtiles.json.check tests/join-population/joined-null.mbtiles.json
|
|
cmp tests/join-population/joined-no-tile-stats.mbtiles.json.check tests/join-population/joined-no-tile-stats.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-values-limit.mbtiles.json
|
|
cmp tests/join-population/joined-i.mbtiles.json.check tests/join-population/joined-i.mbtiles.json
|
|
cmp tests/join-population/merged.mbtiles.json.check tests/join-population/merged.mbtiles.json
|
|
cmp tests/join-population/windows.mbtiles.json.check tests/join-population/windows.mbtiles.json
|
|
rm -f tests/join-population/joined-null.mbtiles tests/join-population/joined-null.mbtiles.json.check
|
|
./tile-join -q -f -l macarthur -n "macarthur name" -N "macarthur description" -A "macarthur's attribution" -o tests/join-population/just-macarthur.mbtiles tests/join-population/merged.mbtiles
|
|
./tile-join -q -f -L macarthur -o tests/join-population/no-macarthur.mbtiles tests/join-population/merged.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/just-macarthur.mbtiles > tests/join-population/just-macarthur.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/no-macarthur.mbtiles > tests/join-population/no-macarthur.mbtiles.json.check
|
|
cmp tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/just-macarthur.mbtiles.json
|
|
cmp tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json
|
|
./tile-join -q --no-tile-compression -f -e tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/raw-merged-folder > tests/join-population/raw-merged-folder.json.check
|
|
cmp tests/join-population/raw-merged-folder.json.check tests/join-population/raw-merged-folder.json
|
|
rm -f tests/join-population/raw-merged-folder.json.check
|
|
./tippecanoe -q -z12 -f -e tests/join-population/tabblock_06001420-folder -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
|
|
./tippecanoe -q -Z5 -z10 -f -e tests/join-population/macarthur-folder -l macarthur tests/join-population/macarthur.json
|
|
./tippecanoe -q -d10 -D10 -Z9 -z11 -f -e tests/join-population/macarthur2-folder -l macarthur tests/join-population/macarthur2.json
|
|
./tile-join -q -f -o tests/join-population/merged-folder.mbtiles tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
|
|
./tippecanoe-decode -x generator tests/join-population/merged-folder.mbtiles > tests/join-population/merged-folder.mbtiles.json.check
|
|
cmp tests/join-population/merged-folder.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json
|
|
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-mbtiles-to-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-folders-to-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-mbtiles-to-folder > tests/join-population/merged-mbtiles-to-folder.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-folders-to-folder > tests/join-population/merged-folders-to-folder.json.check
|
|
cmp tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
|
|
rm -f tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
|
|
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -c tests/join-population/windows.csv -f -e tests/join-population/windows-merged-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -o tests/join-population/windows-merged2.mbtiles tests/join-population/windows-merged-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged.mbtiles > tests/join-population/windows-merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged2.mbtiles > tests/join-population/windows-merged2.mbtiles.json.check
|
|
cmp tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check
|
|
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -e tests/join-population/macarthur-and-macarthur2-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged.mbtiles > tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged2.mbtiles > tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
rm tests/join-population/tabblock_06001420.mbtiles tests/join-population/joined.mbtiles tests/join-population/joined-i.mbtiles tests/join-population/joined.mbtiles.json.check tests/join-population/joined-i.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/merged.mbtiles tests/join-population/merged.mbtiles.json.check tests/join-population/merged-folder.mbtiles tests/join-population/macarthur2.mbtiles tests/join-population/windows.mbtiles tests/join-population/windows-merged.mbtiles tests/join-population/windows-merged2.mbtiles tests/join-population/windows.mbtiles.json.check tests/join-population/just-macarthur.mbtiles tests/join-population/no-macarthur.mbtiles tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json.check tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
rm -rf tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder tests/join-population/merged-mbtiles-to-folder tests/join-population/merged-folders-to-folder tests/join-population/windows-merged-folder tests/join-population/macarthur-and-macarthur2-folder
|
|
# Test renaming of layers
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/join-population/renamed.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/renamed.mbtiles > tests/join-population/renamed.mbtiles.json.check
|
|
cmp tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json
|
|
rm -f tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
# Make sure the concatenated name isn't too long
|
|
./tippecanoe -q -f -z0 -n 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' -o tests/join-population/macarthur.mbtiles tests/join-population/macarthur.json
|
|
./tile-join -f -o tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/concat.mbtiles > tests/join-population/concat.mbtiles.json.check
|
|
cmp tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles.json
|
|
rm tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles
|
|
# Test reading list of input files from file
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/readfile/renamed.mbtiles tests/readfile/macarthur.mbtiles tests/readfile/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options tests/readfile/renamed.mbtiles > tests/readfile/renamed.mbtiles.json.check
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -r tests/readfile/readfile.list -o tests/readfile/readfile.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options tests/readfile/readfile.mbtiles > tests/readfile/readfile.mbtiles.json.check
|
|
cmp tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check
|
|
rm tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check tests/readfile/readfile.mbtiles tests/readfile/renamed.mbtiles
|
|
#`
|
|
# Make sure empty tilesets work
|
|
#
|
|
# mbtiles:
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.mbtiles tests/join-population/empty.json
|
|
./tile-join -f -o tests/join-population/empty.out.mbtiles tests/join-population/empty.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.mbtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.mbtiles tests/join-population/empty.out.mbtiles tests/join-population/empty.out.json.check
|
|
# pmtiles:
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
|
|
./tile-join -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
|
|
# pmtiles again, with --overzoom
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
|
|
./tile-join --overzoom -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
|
|
# dirtiles:
|
|
./tippecanoe -q -z0 -f -e tests/join-population/empty.dirtiles tests/join-population/empty.json
|
|
./tile-join -f -e tests/join-population/empty.out.dirtiles tests/join-population/empty.dirtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.dirtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -rf tests/join-population/empty.dirtiles tests/join-population/empty.out.dirtiles tests/join-population/empty.out.json.check
|
|
#
|
|
# Test overzooming of tilesets with different maxzooms
|
|
#
|
|
mkdir -p tests/ne_110m_ocean/join
|
|
./tippecanoe -q -z2 -f -o tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/in.json
|
|
./tippecanoe -q -z4 -d8 -y name -f -o tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
|
|
./tile-join --overzoom -f -o tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles
|
|
./tippecanoe-decode -x generator tests/ne_110m_ocean/join/joined.mbtiles > tests/ne_110m_ocean/join/joined.mbtiles.json.check
|
|
cmp tests/ne_110m_ocean/join/joined.mbtiles.json.check tests/ne_110m_ocean/join/joined.mbtiles.json
|
|
rm -f tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/joined.mbtiles.json.check
|
|
|
|
join-filter-test: tippecanoe tippecanoe-decode tile-join
|
|
# Comes out different from the direct tippecanoe run because null attributes are lost
|
|
./tippecanoe -q -z0 -f -o tests/feature-filter/out/all.mbtiles tests/feature-filter/in.json
|
|
./tile-join -q -J tests/feature-filter/filter -f -o tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
|
|
./tippecanoe-decode -x generator tests/feature-filter/out/filtered.mbtiles > tests/feature-filter/out/filtered.json.check
|
|
cmp tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.json.standard
|
|
rm -f tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
|
|
# Test zoom level filtering
|
|
./tippecanoe -q -r1 -z8 -f -o tests/feature-filter/out/places.mbtiles tests/ne_110m_populated_places/in.json
|
|
./tile-join -q -J tests/feature-filter/places-filter -f -o tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places.mbtiles
|
|
./tippecanoe-decode -x generator tests/feature-filter/out/places-filter.mbtiles > tests/feature-filter/out/places-filter.mbtiles.json.check
|
|
cmp tests/feature-filter/out/places-filter.mbtiles.json.check tests/feature-filter/out/places-filter.mbtiles.json.standard
|
|
rm -f tests/feature-filter/out/places.mbtiles tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places-filter.mbtiles.json.check
|
|
|
|
json-tool-test: tippecanoe-json-tool
|
|
./tippecanoe-json-tool -e GEOID10 tests/join-population/tabblock_06001420.json | sort > tests/join-population/tabblock_06001420.json.sort
|
|
./tippecanoe-json-tool -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420.json.sort.joined
|
|
./tippecanoe-json-tool --empty-csv-columns-are-null -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420-null.json.sort.joined
|
|
cmp tests/join-population/tabblock_06001420.json.sort.joined tests/join-population/tabblock_06001420.json.sort.joined.standard
|
|
cmp tests/join-population/tabblock_06001420-null.json.sort.joined tests/join-population/tabblock_06001420-null.json.sort.joined.standard
|
|
rm -f tests/join-population/tabblock_06001420.json.sort tests/join-population/tabblock_06001420.json.sort.joined
|
|
rm -f tests/join-population/tabblock_06001420-null.json.sort.joined
|
|
|
|
allow-existing-test: tippecanoe
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.mbtiles > tests/allow-existing/both.mbtiles.json.check
|
|
cmp tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles.json
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe -q -Z10 -z11 -F -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.dir | sed 's/both\.dir/both.mbtiles/g' > tests/allow-existing/both.dir.json.check
|
|
cmp tests/allow-existing/both.dir.json.check tests/allow-existing/both.mbtiles.json
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Allow-existing is not supported for pmtiles
|
|
if ./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
rm -r tests/allow-existing/both.pmtiles tests/allow-existing/both.dir.json.check tests/allow-existing/both.dir tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles
|
|
|
|
csv-test: tippecanoe tippecanoe-decode
|
|
# Reading from named CSV
|
|
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
|
|
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
|
|
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
|
|
# Reading from named CSV, with nulls
|
|
./tippecanoe -q --empty-csv-columns-are-null -zg -f -o tests/csv/out-null.mbtiles tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator tests/csv/out-null.mbtiles > tests/csv/out-null.mbtiles.json.check
|
|
cmp tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles.json
|
|
rm -f tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles
|
|
# Same, but specifying csv with -L format
|
|
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles -L'{"file":"", "format":"csv", "layer":"ne_110m_populated_places_simple"}' < tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
|
|
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
|
|
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
|
|
|
|
flatgeobuf-test: tippecanoe tippecanoe-decode
|
|
./tippecanoe -q -f -z0 -l numeric-properties -o tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.fgb
|
|
./tippecanoe-decode tests/flatgeobuf/numeric-properties.mbtiles 0 0 0 > tests/flatgeobuf/numeric-properties.json.check
|
|
cmp tests/flatgeobuf/numeric-properties.json.check tests/flatgeobuf/numeric-properties.json
|
|
rm -f tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.json.check
|
|
|
|
layer-json-test: tippecanoe tippecanoe-decode
|
|
# GeoJSON with description and named layer
|
|
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"tests/ne_110m_populated_places/in.json", "description":"World cities", "layer":"places"}'
|
|
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
|
|
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
|
|
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
|
|
# Same, but reading from the standard input
|
|
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"", "description":"World cities", "layer":"places"}' < tests/ne_110m_populated_places/in.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
|
|
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
|
|
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
|
|
|
|
# Use this target to regenerate the standards that the tests are compared against
|
|
# after making a change that legitimately changes their output
|
|
|
|
prep-test: $(TESTS)
|
|
|
|
tests/%.json: Makefile tippecanoe tippecanoe-decode
|
|
./tippecanoe -q -a@ -f -o $@.check.mbtiles $(call testargs,$(patsubst %.json,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))
|
|
./tippecanoe-decode -x generator $@.check.mbtiles > $@
|
|
cmp $(patsubst %.check,%,$@) $@
|
|
rm $@.check.mbtiles
|