mirror of
https://github.com/felt/tippecanoe.git
synced 2026-10-02 08:25:40 +02:00
Erica FischerandClaude Opus 5
905fe84459
* Generate the man page with go-md2man instead of md2man-roff md2man-roff is distributed only as a Ruby gem -- it is in neither Homebrew nor apt -- so in practice nobody has it installed and man/tippecanoe.1 drifts away from README.md. It was stale again as of #400: the man page still had the dead All Streets link that commit fixed. Switch to go-md2man, the maintained Go port of the same converter (it is what Docker, podman and runc use). It is packaged as a single static binary for Homebrew, apt, Fedora and Alpine, and it renders inline code as bold the same way md2man-roff did, so the man page still reads the way it used to. It also emits valid roff, which md2man-roff did not. `mandoc -T lint` goes from 621 errors and warnings to 1 (an empty .TH date, left empty on purpose so that generation stays reproducible). 590 of those were `invalid escape sequence: \fC`, from md2man-roff wrapping every inline code span in `\fB\fC` -- `\fC` is not a font escape. md2man-roff was losing content, too: README: 1/(2^32) of the size of Earth md2man-roff: 1/(2 of the size of Earth go-md2man: 1/(2^32) of the size of Earth README: '{"attr": "operation", "attr2": "operation2"}' md2man-roff: '{"attr": "operation", "attr2", "operation2"}' go-md2man: '{"attr": "operation", "attr2": "operation2"}' Prepend a title block and a NAME section during generation rather than adding them to README.md, where they would render as noise on GitHub. The man page had neither, so its header rendered as "tippecanoe()" with no section, and `man -k tippecanoe` and `whatis tippecanoe` found nothing. It now renders as TIPPECANOE(1) and is indexed. Finally, add a CI job that regenerates the man page and fails if the committed copy differs, so a README edit that needs `make docs` gets caught rather than sitting stale until someone notices. This is what makes the missing-tool problem stop mattering: contributors no longer need go-md2man installed to keep the man page current, since CI will tell them when it needs regenerating. The go-md2man version is pinned there because different versions produce different roff for the same input. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015B6PcMbNY779iaczo6S6Pu * Strip the redundant blank lines go-md2man puts between paragraphs go-md2man separates paragraphs with a blank line as well as a .PP macro. A blank line is itself a break in roff, so the two together double-space the page: every paragraph was followed by two blank lines rather than one. md2man-roff did not do this, so it showed up as a regression -- the source went from 13 blank lines to 200. Filter them out after generation. Blank lines inside .EX and .TS blocks are kept, since there they are part of the example or the table rather than spacing around it; that is all 13 of the ones md2man-roff emitted. The rendered page loses 186 blank lines and the source loses 187, with byte-identical non-blank output under both groff -t -man and mandoc. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015B6PcMbNY779iaczo6S6Pu * Decouple the man page from version.hpp, and name the first section Review feedback on #408. Making man/tippecanoe.1 depend on version.hpp turned the docs job into a hard CI failure on any release commit that bumps the version without regenerating -- #406, which is open and moves version.hpp to v2.81.0 without touching the man page, would have tripped it as soon as either merged. The only thing the dependency bought was the version in the page footer, so every release would have had to regenerate the whole file to rewrite that one line, gated by CI. Drop it: the source field is now just "tippecanoe", and the page depends on README.md alone. Separately, README.md's own title heading became the second .SH, directly below the NAME section this branch adds, so the page opened with a stray "tippecanoe" section. Rename it to DESCRIPTION, which is where that text belongs and what a reader expects after NAME. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015B6PcMbNY779iaczo6S6Pu --------- Co-authored-by: Claude <noreply@anthropic.com>
639 lines
55 KiB
Makefile
639 lines
55 KiB
Makefile
PREFIX ?= /usr/local
|
|
MANDIR ?= $(PREFIX)/share/man/man1/
|
|
BUILDTYPE ?= Release
|
|
BUILD_INFO ?=
|
|
SHELL = /bin/sh
|
|
|
|
|
|
# inherit from env if set
|
|
CC := $(CC)
|
|
CXX := $(CXX)
|
|
CFLAGS := $(CFLAGS) -fPIE -DBUILD_INFO=$(BUILD_INFO)
|
|
CXXFLAGS := $(CXXFLAGS) -std=c++17 -fPIE -DBUILD_INFO=$(BUILD_INFO)
|
|
LDFLAGS := $(LDFLAGS)
|
|
WARNING_FLAGS := -Wall -Wshadow -Wsign-compare -Wextra -Wunreachable-code -Wuninitialized -Wshadow
|
|
RELEASE_FLAGS := -O3 -DNDEBUG
|
|
DEBUG_FLAGS := -O0 -DDEBUG -fno-inline-functions -fno-omit-frame-pointer
|
|
|
|
|
|
OS := $(shell uname -s)
|
|
ifeq ($(OS),FreeBSD)
|
|
ADVSHELL = /usr/local/bin/bash
|
|
else
|
|
ADVSHELL = /bin/bash
|
|
endif
|
|
|
|
|
|
ifeq ($(BUILDTYPE),Release)
|
|
FINAL_FLAGS := -g $(WARNING_FLAGS) $(RELEASE_FLAGS)
|
|
else
|
|
FINAL_FLAGS := -g $(WARNING_FLAGS) $(DEBUG_FLAGS)
|
|
endif
|
|
|
|
all: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join unit tippecanoe-json-tool tippecanoe-overzoom
|
|
|
|
docs: man/tippecanoe.1
|
|
|
|
install: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join tippecanoe-json-tool tippecanoe-overzoom
|
|
mkdir -p $(PREFIX)/bin
|
|
mkdir -p $(MANDIR)
|
|
cp tippecanoe $(PREFIX)/bin/tippecanoe
|
|
cp tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-enumerate
|
|
cp tippecanoe-decode $(PREFIX)/bin/tippecanoe-decode
|
|
cp tippecanoe-json-tool $(PREFIX)/bin/tippecanoe-json-tool
|
|
cp tippecanoe-overzoom $(PREFIX)/bin/tippecanoe-overzoom
|
|
cp tile-join $(PREFIX)/bin/tile-join
|
|
cp man/tippecanoe.1 $(MANDIR)/tippecanoe.1
|
|
|
|
uninstall:
|
|
rm $(PREFIX)/bin/tippecanoe $(PREFIX)/bin/tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-decode $(PREFIX)/bin/tile-join $(MANDIR)/tippecanoe.1 $(PREFIX)/bin/tippecanoe-json-tool
|
|
|
|
# The man page is generated from README.md by go-md2man, which is packaged for
|
|
# most systems (`brew install go-md2man`, `apt-get install go-md2man`) or can be
|
|
# built with `go install github.com/cpuguy83/go-md2man/v2@v2.0.7`. CI checks that
|
|
# the committed man page matches the README, so you don't have to regenerate it
|
|
# yourself if you don't have go-md2man installed.
|
|
#
|
|
# README.md has no .TH or NAME section of its own, since neither would make sense
|
|
# on GitHub, so prepend them here. go-md2man reads the leading "%" line as the
|
|
# man page's title, section, date, and source. The version deliberately doesn't
|
|
# appear there: it would make this page a build product of version.hpp, so every
|
|
# release would have to regenerate it just to rewrite that one line, and the docs
|
|
# CI job would fail on any version bump that forgot to.
|
|
#
|
|
# Two fixups on the way out:
|
|
#
|
|
# - README.md's own title heading becomes the second .SH, right below the NAME
|
|
# section added above, which reads as a stray "tippecanoe" section. Rename it
|
|
# to DESCRIPTION, where the text under it belongs anyway.
|
|
# - go-md2man separates paragraphs with a blank line in addition to the .PP
|
|
# macro, and a blank line is itself a break in roff, so the two together
|
|
# double-space the whole page. Drop them, except within .EX and .TS blocks,
|
|
# where a blank line is part of the example or table rather than spacing.
|
|
man/tippecanoe.1: README.md
|
|
{ \
|
|
echo '% TIPPECANOE 1 "" "tippecanoe"'; \
|
|
echo; \
|
|
echo '# NAME'; \
|
|
echo; \
|
|
echo 'tippecanoe - build vector tilesets from GeoJSON, FlatGeobuf, or CSV features'; \
|
|
echo; \
|
|
cat README.md; \
|
|
} | go-md2man \
|
|
| awk ' \
|
|
/^\.SH / && ++sh == 2 { print ".SH DESCRIPTION"; next } \
|
|
/^\.(EX|TS)$$/ { lit = 1 } \
|
|
/^\.(EE|TE)$$/ { lit = 0 } \
|
|
lit || !/^$$/ \
|
|
' > $@.tmp && mv $@.tmp $@
|
|
|
|
PG=
|
|
|
|
H = $(wildcard *.h) $(wildcard *.hpp)
|
|
C = $(wildcard *.c) $(wildcard *.cpp)
|
|
|
|
INCLUDES = -I/usr/local/include -I. -Iclipper2/include
|
|
LIBS = -L/usr/local/lib
|
|
|
|
tippecanoe: geojson.o jsonpull/jsonpull.o tile.o pool.o mbtiles.o geometry.o projection.o memfile.o mvt.o serial.o main.o platform.o text.o dirtiles.o pmtiles_file.o plugin.o read_json.o write_json.o geobuf.o flatgeobuf.o evaluator.o geocsv.o csv.o geojson-loop.o json_logger.o visvalingam.o compression.o clip.o sort.o attribute.o thread.o shared_borders.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-enumerate: enumerate.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lsqlite3
|
|
|
|
tippecanoe-decode: decode.o projection.o mvt.o write_json.o text.o jsonpull/jsonpull.o dirtiles.o pmtiles_file.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3
|
|
|
|
tile-join: tile-join.o platform.o projection.o mbtiles.o mvt.o memfile.o dirtiles.o jsonpull/jsonpull.o text.o evaluator.o csv.o write_json.o pmtiles_file.o clip.o attribute.o thread.o read_json.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-json-tool: jsontool.o jsonpull/jsonpull.o csv.o text.o geojson-loop.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
unit: unit.o text.o sort.o mvt.o projection.o clip.o attribute.o jsonpull/jsonpull.o evaluator.o read_json.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-overzoom: overzoom.o mvt.o clip.o evaluator.o jsonpull/jsonpull.o text.o attribute.o read_json.o projection.o read_json.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
-include $(wildcard *.d)
|
|
|
|
%.o: %.c
|
|
$(CC) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CFLAGS) -c -o $@ $<
|
|
|
|
%.o: %.cpp
|
|
$(CXX) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CXXFLAGS) -c -o $@ $<
|
|
|
|
clean:
|
|
rm -f ./tippecanoe ./tippecanoe-* ./tile-join ./unit *.o *.d */*.o */*.d tests/**/*.mbtiles tests/**/*.check
|
|
|
|
indent:
|
|
clang-format -i -style="{BasedOnStyle: Google, IndentWidth: 8, UseTab: Always, AllowShortIfStatementsOnASingleLine: false, ColumnLimit: 0, ContinuationIndentWidth: 8, SpaceAfterCStyleCast: true, IndentCaseLabels: false, AllowShortBlocksOnASingleLine: false, AllowShortFunctionsOnASingleLine: false, SortIncludes: false}" $(filter-out flatgeobuf.cpp,$(C)) $(H) jsonpull/*.[ch]
|
|
|
|
TESTS = $(wildcard tests/*/out/*.json)
|
|
SPACE = $(NULL) $(NULL)
|
|
|
|
test: tippecanoe tippecanoe-decode $(addsuffix .check,$(TESTS)) raw-tiles-test parallel-test pbf-test join-test enumerate-test decode-test join-filter-test unit json-tool-test allow-existing-test csv-test layer-json-test pmtiles-test decode-pmtiles-test overzoom-test flatgeobuf-test
|
|
./unit
|
|
|
|
suffixes = json json.gz
|
|
|
|
# Work around Makefile and filename punctuation limits:
|
|
# _ for argument-separator space
|
|
# %20 for quoted space
|
|
# %22 for quoted quote
|
|
# %2f for /
|
|
# %3a for :
|
|
# %5f for _
|
|
# %7b for {
|
|
|
|
testargs = \
|
|
$(subst %20,' ',\
|
|
$(subst %22,'"',\
|
|
$(subst %3a,:,\
|
|
$(subst %2f,/,\
|
|
$(subst %7b,'{',\
|
|
$(subst %5f,'_',\
|
|
$(subst _, ,$(1))))))))
|
|
|
|
%.json.check:
|
|
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.check,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix)))) < /dev/null
|
|
./tippecanoe-decode -x generator $@.mbtiles > $@.out
|
|
cmp $@.out $(patsubst %.check,%,$@)
|
|
rm $@.out $@.mbtiles
|
|
|
|
# Don't test overflow with geobuf, because it fails (https://github.com/mapbox/geobuf/issues/87)
|
|
# Don't test stringids with geobuf, because it fails
|
|
nogeobuf = tests/overflow/out/-z0.json $(wildcard tests/stringid/out/*.json)
|
|
geobuf-test: tippecanoe-json-tool $(addsuffix .checkbuf,$(filter-out $(nogeobuf),$(TESTS)))
|
|
|
|
# For quicker address sanitizer build, hope that regular JSON parsing is tested enough by parallel and join tests
|
|
fewer-tests: tippecanoe tippecanoe-decode geobuf-test raw-tiles-test parallel-test pbf-test join-test enumerate-test decode-test join-filter-test unit
|
|
|
|
# XXX Use proper makefile rules instead of a for loop
|
|
%.json.checkbuf:
|
|
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json); do ./tippecanoe-json-tool -w $$i | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
|
|
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json.gz); do gzip -dc $$i | ./tippecanoe-json-tool -w | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
|
|
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.checkbuf,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(addsuffix .geobuf,$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))) < /dev/null
|
|
./tippecanoe-decode -x generator $@.mbtiles | sed 's/checkbuf/check/g' | sed 's/\.geobuf//g' > $@.out
|
|
cmp $@.out $(patsubst %.checkbuf,%,$@)
|
|
rm $@.out $@.mbtiles
|
|
|
|
parallel-test: $(eval SHELL:=$(ADVSHELL))
|
|
mkdir -p tests/parallel
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$k = rand(1); $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { \"yes\": \"no\", \"who\": 1, \"$$k\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in1.json
|
|
perl -e 'for ($$i = 0; $$i < 300000; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in2.json
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in3.json
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { }, \"tippecanoe\": { \"layer\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in4.json
|
|
echo -n "" > tests/parallel/empty1.json
|
|
echo "" > tests/parallel/empty2.json
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
|
|
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-pipe.mbtiles
|
|
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipe.mbtiles
|
|
cat tests/parallel/in[1234].json | sed 's/^/@/' | tr '@' '\036' | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/implicit-pipe.mbtiles
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipes.mbtiles <(cat tests/parallel/in1.json) <(cat tests/parallel/empty1.json) <(cat tests/parallel/empty2.json) <(cat tests/parallel/in2.json) /dev/null <(cat tests/parallel/in3.json) <(cat tests/parallel/in4.json)
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-file.mbtiles > tests/parallel/linear-file.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-file.mbtiles > tests/parallel/parallel-file.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-pipe.mbtiles > tests/parallel/linear-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipe.mbtiles > tests/parallel/parallel-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/implicit-pipe.mbtiles > tests/parallel/implicit-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipes.mbtiles > tests/parallel/parallel-pipes.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-file.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/linear-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/implicit-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipes.json
|
|
rm tests/parallel/*.mbtiles tests/parallel/*.json
|
|
|
|
raw-tiles-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -e tests/raw-tiles/raw-tiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles.json.check
|
|
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
|
|
# Test that -z and -Z work in tippecanoe-decode
|
|
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles-z67.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
|
|
# Test that -z and -Z work in tile-join
|
|
./tile-join -q -f -Z6 -z7 -e tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67 > tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
|
|
rm -rf tests/raw-tiles/raw-tiles tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
# Test that metadata.json is created even if all features are clipped away
|
|
./tippecanoe -q -f -e tests/raw-tiles/nothing tests/raw-tiles/nothing.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/nothing > tests/raw-tiles/nothing.json.check
|
|
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
|
|
rm -r tests/raw-tiles/nothing tests/raw-tiles/nothing.json.check
|
|
|
|
pmtiles-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -o tests/pmtiles/hackspots.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/pmtiles/hackspots.pmtiles > tests/pmtiles/hackspots.json.check
|
|
cmp tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.json
|
|
# Test generating pmtiles first and then converting to mbtiles with tile-join.
|
|
./tile-join -q -f -pC -o tests/pmtiles/joined.mbtiles tests/pmtiles/hackspots.pmtiles
|
|
./tippecanoe-decode -x generator tests/pmtiles/joined.mbtiles > tests/pmtiles/joined.json.check
|
|
cmp tests/pmtiles/joined.json.check tests/pmtiles/joined.json
|
|
rm -r tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.pmtiles
|
|
|
|
# Test generating mbtiles first and then converting to pmtiles with tile-join. (Changes bounds)
|
|
./tippecanoe -q -f -o tests/pmtiles/hackspots.mbtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tile-join -q -f -pC -o tests/pmtiles/joined.pmtiles tests/pmtiles/hackspots.mbtiles
|
|
|
|
# decode changes order (ZXY vs TMS order)
|
|
./tippecanoe-decode -x generator tests/pmtiles/joined.pmtiles > tests/pmtiles/joined_reordered.json.check
|
|
cmp tests/pmtiles/joined_reordered.json.check tests/pmtiles/joined_reordered.json
|
|
rm -r tests/pmtiles/joined_reordered.json.check tests/pmtiles/hackspots.mbtiles tests/pmtiles/joined.pmtiles
|
|
|
|
# From raw-tiles-test:
|
|
./tippecanoe -q -f -o tests/raw-tiles/raw-tiles.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles.json.check
|
|
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
|
|
# Test that -z and -Z work in tippecanoe-decode
|
|
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
|
|
# Test that -z and -Z work in tile-join
|
|
./tile-join -q -f -Z6 -z7 -o tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.pmtiles
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
|
|
rm -rf tests/raw-tiles/raw-tiles.pmtiles tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
# Test that metadata.json is created even if all features are clipped away
|
|
./tippecanoe -q -f -o tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/nothing.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/nothing.json.check
|
|
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
|
|
rm -r tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.json.check
|
|
|
|
decode-test: tippecanoe tippecanoe-decode
|
|
mkdir -p tests/muni/decode
|
|
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.mbtiles tests/muni/*.json
|
|
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.integer.json.check
|
|
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.fraction.json.check
|
|
./tippecanoe-decode -x generator -c tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.pipeline.json.check
|
|
./tippecanoe-decode -x generator tests/muni/decode/multi.mbtiles 11 327 791 > tests/muni/decode/multi.mbtiles.onetile.json.check
|
|
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.stats.json.check
|
|
cmp tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles.json
|
|
cmp tests/muni/decode/multi.mbtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
|
|
cmp tests/muni/decode/multi.mbtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
|
|
cmp tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
|
|
cmp tests/muni/decode/multi.mbtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
|
|
cmp tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
|
|
rm -f tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.onetile.json.check
|
|
|
|
decode-pmtiles-test: tippecanoe tippecanoe-decode
|
|
mkdir -p tests/muni/decode
|
|
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.pmtiles tests/muni/*.json
|
|
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.json.check
|
|
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.integer.json.check
|
|
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.fraction.json.check
|
|
./tippecanoe-decode -x generator -c tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.pipeline.json.check
|
|
./tippecanoe-decode -x generator tests/muni/decode/multi.pmtiles 11 327 791 | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.onetile.json.check
|
|
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.stats.json.check
|
|
cmp tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.mbtiles.json
|
|
cmp tests/muni/decode/multi.pmtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
|
|
cmp tests/muni/decode/multi.pmtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
|
|
cmp tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
|
|
cmp tests/muni/decode/multi.pmtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
|
|
cmp tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
|
|
rm -f tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.pmtiles tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.pmtiles.onetile.json.check
|
|
|
|
pbf-test: tippecanoe-decode
|
|
./tippecanoe-decode -x generator tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.vector.pbf.out
|
|
cmp tests/pbf/11-328-791.json tests/pbf/11-328-791.vector.pbf.out
|
|
rm tests/pbf/11-328-791.vector.pbf.out
|
|
./tippecanoe-decode -x generator -s EPSG:3857 tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.3857.vector.pbf.out
|
|
cmp tests/pbf/11-328-791.3857.json tests/pbf/11-328-791.3857.vector.pbf.out
|
|
rm tests/pbf/11-328-791.3857.vector.pbf.out
|
|
|
|
enumerate-test: tippecanoe tippecanoe-enumerate
|
|
./tippecanoe -q -z5 -f -o tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
|
|
./tippecanoe-enumerate tests/ne_110m_admin_0_countries/out/enum.mbtiles > tests/ne_110m_admin_0_countries/out/enum.check
|
|
cmp tests/ne_110m_admin_0_countries/out/enum.check tests/ne_110m_admin_0_countries/out/enum
|
|
rm tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/out/enum.check
|
|
|
|
overzoom-test: tippecanoe-overzoom
|
|
# Basic operation
|
|
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
|
|
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
|
|
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
|
|
# Make sure feature order is stable
|
|
# Large -b20 tile buffer to prevent altering the geometries by clipping
|
|
./tippecanoe-overzoom -b20 --preserve-input-order -o tests/pbf/11-327-791-out.pbf tests/pbf/11-327-791.pbf 11/327/791 11/327/791
|
|
./tippecanoe-decode tests/pbf/11-327-791.pbf 11 327 791 > tests/pbf/11-327-791.json
|
|
./tippecanoe-decode tests/pbf/11-327-791-out.pbf 11 327 791 > tests/pbf/11-327-791-out.json
|
|
cmp tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json
|
|
rm tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json tests/pbf/11-327-791-out.pbf
|
|
# Basic operation, multiple input form
|
|
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791
|
|
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
|
|
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
|
|
# Multiple inputs, no compression
|
|
./tippecanoe-overzoom --no-tile-compression -o tests/pbf/13-1310-3166-ne.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791 tests/pbf/0-0-0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/13-1310-3166-ne.pbf 13 1310 3166 > tests/pbf/13-1310-3166-ne.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166-ne.pbf.json.check tests/pbf/13-1310-3166-ne.pbf.json
|
|
rm tests/pbf/13-1310-3166-ne.pbf tests/pbf/13-1310-3166-ne.pbf.json.check
|
|
# Different detail and buffer, and attribute stripping
|
|
./tippecanoe-overzoom -d8 -b30 -y NAME -y name -y scalerank -o tests/pbf/13-1310-3166-8-30.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
|
|
./tippecanoe-decode tests/pbf/13-1310-3166-8-30.pbf 13 1310 3166 > tests/pbf/13-1310-3166-8-30.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166-8-30.pbf.json.check tests/pbf/13-1310-3166-8-30.pbf.json
|
|
rm tests/pbf/13-1310-3166-8-30.pbf tests/pbf/13-1310-3166-8-30.pbf.json.check
|
|
# No features in child tile
|
|
./tippecanoe-overzoom -o tests/pbf/14-2616-6331.pbf tests/pbf/11-327-791.pbf 11/327/791 14/2616/6331
|
|
cmp tests/pbf/14-2616-6331.pbf /dev/null
|
|
rm tests/pbf/14-2616-6331.pbf
|
|
# Thinning
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 9 of them survive as the best of each cluster of 30
|
|
# ./tippecanoe -z1 -r30 --retain-points-multiplier 30 -f -e out.dir tests/ne_110m_populated_places/in.json
|
|
# cp out.dir/0/0/0.pbf tests/pbf/0-0-0-pop.pbf
|
|
./tippecanoe-overzoom -y NAME -m -o tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-filtered.pbf 0 0 0 > tests/pbf/0-0-0-pop-filtered.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-filtered.pbf.json.check tests/pbf/0-0-0-pop-filtered.pbf.json
|
|
rm tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop-filtered.pbf.json.check
|
|
# Thinning with accumulation
|
|
./tippecanoe-overzoom -y NAME -m --accumulate-attribute NAME:comma -o tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-accum.pbf 0 0 0 > tests/pbf/0-0-0-pop-accum.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-accum.pbf.json.check tests/pbf/0-0-0-pop-accum.pbf.json
|
|
rm tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop-accum.pbf.json.check
|
|
# Filtering
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 27 of them match the filter and are retained
|
|
./tippecanoe-overzoom -y NAME -j'{"*":["==","SCALERANK",0]}' -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
|
|
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
# Same filter test, but reading the filter from a file
|
|
./tippecanoe-overzoom -y NAME -J tests/pbf/scalerank-0-filter.json -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
|
|
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
# Filtering with multiplier
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 8 features survive into the output, from 9 clusters of 30
|
|
./tippecanoe-overzoom -y NAME -y SCALERANK -j'{"*":["==","SCALERANK",0]}' -m -o tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-filter-mult.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult.pbf.json.check
|
|
cmp tests/pbf/0-0-0-filter-mult.pbf.json.check tests/pbf/0-0-0-filter-mult.pbf.json
|
|
rm tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-filter-mult.pbf.json.check
|
|
# Filtering with multiplier and preserve-input-order
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
./tippecanoe-overzoom -y NAME -y SCALERANK -y LATITUDE -j'{"*":[">","LATITUDE",40]}' -m --preserve-input-order -o tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-filter-mult-order.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult-order.pbf.json.check
|
|
cmp tests/pbf/0-0-0-filter-mult-order.pbf.json.check tests/pbf/0-0-0-filter-mult-order.pbf.json
|
|
rm tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-filter-mult-order.pbf.json.check
|
|
# Test that overzooming with a multiplier exactly reverses the effect of tiling with a multiplier
|
|
./tippecanoe -q -z5 --preserve-point-density-threshold 8 --retain-points-multiplier 3 -f -e tests/muni/out/out.dir tests/muni/muni.json
|
|
./tippecanoe -q -z5 --preserve-point-density-threshold 8 -f -o tests/muni/out/out.mbtiles tests/muni/muni.json
|
|
./tippecanoe-overzoom -m -o tests/muni/out/out.dir/000.pbf tests/muni/out/out.dir/0/0/0.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/muni/out/out.mbtiles 0 0 0 > tests/muni/out/out.dir/direct.json
|
|
./tippecanoe-decode tests/muni/out/out.dir/000.pbf 0 0 0 > tests/muni/out/out.dir/overzoomed.json
|
|
cmp tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
|
|
rm -rf tests/muni/out/out.dir tests/muni/out/out.mbtiles tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
|
|
# Tiny polygon reduction
|
|
./tippecanoe-overzoom --line-simplification=5 --tiny-polygon-size=50 -o tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/countries-0-0-0.pbf.out 0 0 0 > tests/pbf/countries-0-0-0.pbf.out.json.check
|
|
cmp tests/pbf/countries-0-0-0.pbf.out.json.check tests/pbf/countries-0-0-0.pbf.out.json
|
|
rm tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf.out.json.check
|
|
# Deduplication by feature ID
|
|
./tippecanoe -z0 -f -e tests/pbf/1.json.dir -l layer tests/pbf/1.json
|
|
./tippecanoe -z0 -f -e tests/pbf/2.json.dir -l layer tests/pbf/2.json
|
|
./tippecanoe-overzoom -b0 -o tests/pbf/merged-nodedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/merged-nodedup.pbf 1 1 0 > tests/pbf/merged-nodedup.pbf.json.check
|
|
cmp tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-nodedup.pbf.json
|
|
./tippecanoe-overzoom -b0 --deduplicate-by-id -o tests/pbf/merged-dedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/merged-dedup.pbf 1 1 0 > tests/pbf/merged-dedup.pbf.json.check
|
|
cmp tests/pbf/merged-dedup.pbf.json.check tests/pbf/merged-dedup.pbf.json
|
|
rm -r tests/pbf/1.json.dir tests/pbf/2.json.dir tests/pbf/merged-nodedup.pbf tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-dedup.pbf.json.check
|
|
|
|
join-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -z12 -o tests/join-population/tabblock_06001420.mbtiles -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur tests/join-population/macarthur.json
|
|
./tile-join -q -f -Z6 -z9 -o tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9.mbtiles > tests/join-population/macarthur-6-9.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles.json
|
|
./tile-join -q -f -Z6 -z9 -X -o tests/join-population/macarthur-6-9-exclude.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9-exclude.mbtiles > tests/join-population/macarthur-6-9-exclude.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles.json
|
|
rm -f tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles
|
|
./tippecanoe -q -f -d10 -D10 -Z9 -z11 -o tests/join-population/macarthur2.mbtiles -l macarthur tests/join-population/macarthur2.json
|
|
./tile-join --quiet --force -o tests/join-population/joined.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force -o tests/join-population/joined-null.mbtiles --empty-csv-columns-are-null -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --no-tile-stats -o tests/join-population/joined-no-tile-stats.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-attributes-limit=1 -o tests/join-population/joined-tile-stats-attributes-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-sample-values-limit=1 -o tests/join-population/joined-tile-stats-sample-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-values-limit=1 -o tests/join-population/joined-tile-stats-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join -q -f -i -o tests/join-population/joined-i.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join -q -f -o tests/join-population/merged.mbtiles tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined.mbtiles > tests/join-population/joined.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-null.mbtiles > tests/join-population/joined-null.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-no-tile-stats.mbtiles > tests/join-population/joined-no-tile-stats.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-attributes-limit.mbtiles > tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-values-limit.mbtiles > tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-sample-values-limit.mbtiles > tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/joined-i.mbtiles > tests/join-population/joined-i.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/merged.mbtiles > tests/join-population/merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/windows.mbtiles > tests/join-population/windows.mbtiles.json.check
|
|
cmp tests/join-population/joined.mbtiles.json.check tests/join-population/joined.mbtiles.json
|
|
cmp tests/join-population/joined-null.mbtiles.json.check tests/join-population/joined-null.mbtiles.json
|
|
cmp tests/join-population/joined-no-tile-stats.mbtiles.json.check tests/join-population/joined-no-tile-stats.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-values-limit.mbtiles.json
|
|
cmp tests/join-population/joined-i.mbtiles.json.check tests/join-population/joined-i.mbtiles.json
|
|
cmp tests/join-population/merged.mbtiles.json.check tests/join-population/merged.mbtiles.json
|
|
cmp tests/join-population/windows.mbtiles.json.check tests/join-population/windows.mbtiles.json
|
|
rm -f tests/join-population/joined-null.mbtiles tests/join-population/joined-null.mbtiles.json.check
|
|
./tile-join -q -f -l macarthur -n "macarthur name" -N "macarthur description" -A "macarthur's attribution" -o tests/join-population/just-macarthur.mbtiles tests/join-population/merged.mbtiles
|
|
./tile-join -q -f -L macarthur -o tests/join-population/no-macarthur.mbtiles tests/join-population/merged.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/just-macarthur.mbtiles > tests/join-population/just-macarthur.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/no-macarthur.mbtiles > tests/join-population/no-macarthur.mbtiles.json.check
|
|
cmp tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/just-macarthur.mbtiles.json
|
|
cmp tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json
|
|
./tile-join -q --no-tile-compression -f -e tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/raw-merged-folder > tests/join-population/raw-merged-folder.json.check
|
|
cmp tests/join-population/raw-merged-folder.json.check tests/join-population/raw-merged-folder.json
|
|
rm -f tests/join-population/raw-merged-folder.json.check
|
|
./tippecanoe -q -z12 -f -e tests/join-population/tabblock_06001420-folder -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
|
|
./tippecanoe -q -Z5 -z10 -f -e tests/join-population/macarthur-folder -l macarthur tests/join-population/macarthur.json
|
|
./tippecanoe -q -d10 -D10 -Z9 -z11 -f -e tests/join-population/macarthur2-folder -l macarthur tests/join-population/macarthur2.json
|
|
./tile-join -q -f -o tests/join-population/merged-folder.mbtiles tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
|
|
./tippecanoe-decode -x generator tests/join-population/merged-folder.mbtiles > tests/join-population/merged-folder.mbtiles.json.check
|
|
cmp tests/join-population/merged-folder.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json
|
|
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-mbtiles-to-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-folders-to-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-mbtiles-to-folder > tests/join-population/merged-mbtiles-to-folder.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-folders-to-folder > tests/join-population/merged-folders-to-folder.json.check
|
|
cmp tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
|
|
rm -f tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
|
|
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -c tests/join-population/windows.csv -f -e tests/join-population/windows-merged-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -o tests/join-population/windows-merged2.mbtiles tests/join-population/windows-merged-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged.mbtiles > tests/join-population/windows-merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged2.mbtiles > tests/join-population/windows-merged2.mbtiles.json.check
|
|
cmp tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check
|
|
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -e tests/join-population/macarthur-and-macarthur2-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged.mbtiles > tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged2.mbtiles > tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
rm tests/join-population/tabblock_06001420.mbtiles tests/join-population/joined.mbtiles tests/join-population/joined-i.mbtiles tests/join-population/joined.mbtiles.json.check tests/join-population/joined-i.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/merged.mbtiles tests/join-population/merged.mbtiles.json.check tests/join-population/merged-folder.mbtiles tests/join-population/macarthur2.mbtiles tests/join-population/windows.mbtiles tests/join-population/windows-merged.mbtiles tests/join-population/windows-merged2.mbtiles tests/join-population/windows.mbtiles.json.check tests/join-population/just-macarthur.mbtiles tests/join-population/no-macarthur.mbtiles tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json.check tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
rm -rf tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder tests/join-population/merged-mbtiles-to-folder tests/join-population/merged-folders-to-folder tests/join-population/windows-merged-folder tests/join-population/macarthur-and-macarthur2-folder
|
|
# Test renaming of layers
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/join-population/renamed.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/renamed.mbtiles > tests/join-population/renamed.mbtiles.json.check
|
|
cmp tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json
|
|
rm -f tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
# Make sure the concatenated name isn't too long
|
|
./tippecanoe -q -f -z0 -n 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' -o tests/join-population/macarthur.mbtiles tests/join-population/macarthur.json
|
|
./tile-join -f -o tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/concat.mbtiles > tests/join-population/concat.mbtiles.json.check
|
|
cmp tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles.json
|
|
rm tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles
|
|
# Test reading list of input files from file
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/readfile/renamed.mbtiles tests/readfile/macarthur.mbtiles tests/readfile/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options tests/readfile/renamed.mbtiles > tests/readfile/renamed.mbtiles.json.check
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -r tests/readfile/readfile.list -o tests/readfile/readfile.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options tests/readfile/readfile.mbtiles > tests/readfile/readfile.mbtiles.json.check
|
|
cmp tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check
|
|
rm tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check tests/readfile/readfile.mbtiles tests/readfile/renamed.mbtiles
|
|
#`
|
|
# Make sure empty tilesets work
|
|
#
|
|
# mbtiles:
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.mbtiles tests/join-population/empty.json
|
|
./tile-join -f -o tests/join-population/empty.out.mbtiles tests/join-population/empty.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.mbtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.mbtiles tests/join-population/empty.out.mbtiles tests/join-population/empty.out.json.check
|
|
# pmtiles:
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
|
|
./tile-join -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
|
|
# pmtiles again, with --overzoom
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
|
|
./tile-join --overzoom -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
|
|
# dirtiles:
|
|
./tippecanoe -q -z0 -f -e tests/join-population/empty.dirtiles tests/join-population/empty.json
|
|
./tile-join -f -e tests/join-population/empty.out.dirtiles tests/join-population/empty.dirtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.dirtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -rf tests/join-population/empty.dirtiles tests/join-population/empty.out.dirtiles tests/join-population/empty.out.json.check
|
|
#
|
|
# Test overzooming of tilesets with different maxzooms
|
|
#
|
|
mkdir -p tests/ne_110m_ocean/join
|
|
./tippecanoe -q -z2 -f -o tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/in.json
|
|
./tippecanoe -q -z4 -d8 -y name -f -o tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
|
|
./tile-join --overzoom -f -o tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles
|
|
./tippecanoe-decode -x generator tests/ne_110m_ocean/join/joined.mbtiles > tests/ne_110m_ocean/join/joined.mbtiles.json.check
|
|
cmp tests/ne_110m_ocean/join/joined.mbtiles.json.check tests/ne_110m_ocean/join/joined.mbtiles.json
|
|
rm -f tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/joined.mbtiles.json.check
|
|
|
|
join-filter-test: tippecanoe tippecanoe-decode tile-join
|
|
# Comes out different from the direct tippecanoe run because null attributes are lost
|
|
./tippecanoe -q -z0 -f -o tests/feature-filter/out/all.mbtiles tests/feature-filter/in.json
|
|
./tile-join -q -J tests/feature-filter/filter -f -o tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
|
|
./tippecanoe-decode -x generator tests/feature-filter/out/filtered.mbtiles > tests/feature-filter/out/filtered.json.check
|
|
cmp tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.json.standard
|
|
rm -f tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
|
|
# Test zoom level filtering
|
|
./tippecanoe -q -r1 -z8 -f -o tests/feature-filter/out/places.mbtiles tests/ne_110m_populated_places/in.json
|
|
./tile-join -q -J tests/feature-filter/places-filter -f -o tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places.mbtiles
|
|
./tippecanoe-decode -x generator tests/feature-filter/out/places-filter.mbtiles > tests/feature-filter/out/places-filter.mbtiles.json.check
|
|
cmp tests/feature-filter/out/places-filter.mbtiles.json.check tests/feature-filter/out/places-filter.mbtiles.json.standard
|
|
rm -f tests/feature-filter/out/places.mbtiles tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places-filter.mbtiles.json.check
|
|
|
|
json-tool-test: tippecanoe-json-tool
|
|
./tippecanoe-json-tool -e GEOID10 tests/join-population/tabblock_06001420.json | sort > tests/join-population/tabblock_06001420.json.sort
|
|
./tippecanoe-json-tool -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420.json.sort.joined
|
|
./tippecanoe-json-tool --empty-csv-columns-are-null -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420-null.json.sort.joined
|
|
cmp tests/join-population/tabblock_06001420.json.sort.joined tests/join-population/tabblock_06001420.json.sort.joined.standard
|
|
cmp tests/join-population/tabblock_06001420-null.json.sort.joined tests/join-population/tabblock_06001420-null.json.sort.joined.standard
|
|
rm -f tests/join-population/tabblock_06001420.json.sort tests/join-population/tabblock_06001420.json.sort.joined
|
|
rm -f tests/join-population/tabblock_06001420-null.json.sort.joined
|
|
|
|
allow-existing-test: tippecanoe
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.mbtiles > tests/allow-existing/both.mbtiles.json.check
|
|
cmp tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles.json
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe -q -Z10 -z11 -F -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.dir | sed 's/both\.dir/both.mbtiles/g' > tests/allow-existing/both.dir.json.check
|
|
cmp tests/allow-existing/both.dir.json.check tests/allow-existing/both.mbtiles.json
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Allow-existing is not supported for pmtiles
|
|
if ./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
rm -r tests/allow-existing/both.pmtiles tests/allow-existing/both.dir.json.check tests/allow-existing/both.dir tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles
|
|
|
|
csv-test: tippecanoe tippecanoe-decode
|
|
# Reading from named CSV
|
|
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
|
|
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
|
|
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
|
|
# Reading from named CSV, with nulls
|
|
./tippecanoe -q --empty-csv-columns-are-null -zg -f -o tests/csv/out-null.mbtiles tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator tests/csv/out-null.mbtiles > tests/csv/out-null.mbtiles.json.check
|
|
cmp tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles.json
|
|
rm -f tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles
|
|
# Same, but specifying csv with -L format
|
|
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles -L'{"file":"", "format":"csv", "layer":"ne_110m_populated_places_simple"}' < tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
|
|
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
|
|
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
|
|
|
|
flatgeobuf-test: tippecanoe tippecanoe-decode
|
|
./tippecanoe -q -f -z0 -l numeric-properties -o tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.fgb
|
|
./tippecanoe-decode tests/flatgeobuf/numeric-properties.mbtiles 0 0 0 > tests/flatgeobuf/numeric-properties.json.check
|
|
cmp tests/flatgeobuf/numeric-properties.json.check tests/flatgeobuf/numeric-properties.json
|
|
rm -f tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.json.check
|
|
|
|
layer-json-test: tippecanoe tippecanoe-decode
|
|
# GeoJSON with description and named layer
|
|
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"tests/ne_110m_populated_places/in.json", "description":"World cities", "layer":"places"}'
|
|
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
|
|
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
|
|
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
|
|
# Same, but reading from the standard input
|
|
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"", "description":"World cities", "layer":"places"}' < tests/ne_110m_populated_places/in.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
|
|
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
|
|
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
|
|
|
|
# Use this target to regenerate the standards that the tests are compared against
|
|
# after making a change that legitimately changes their output
|
|
|
|
prep-test: $(TESTS)
|
|
|
|
tests/%.json: Makefile tippecanoe tippecanoe-decode
|
|
./tippecanoe -q -a@ -f -o $@.check.mbtiles $(call testargs,$(patsubst %.json,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))
|
|
./tippecanoe-decode -x generator $@.check.mbtiles > $@
|
|
cmp $(patsubst %.check,%,$@) $@
|
|
rm $@.check.mbtiles
|