mirror of
https://github.com/felt/tippecanoe.git
synced 2026-10-02 08:25:40 +02:00
Erica FischerandClaude Opus 5
63fcac725a
* Only skip polygon cleaning if we are still at very high resolution * Remove collinear points and clean polygons even at high resolution * If we truncated but still have the data and need to drop, revive * Deduplicate by ID even when the duplicate is clipped away * Test that deduplication works across tile boundaries * Write out children of a tile revived after its parent truncated A tile writes the geometry for its children on pass 0 of its zoom level, and the later passes, which are only retries with new thresholds, must not write it again. But a tile whose parent truncated its pyramid is skipped on pass 0, and is only revived on a later pass, once the zoom has had to start dropping features. Gating on pass 0 meant its children were never written at all, so a revived tile was always a dead end: it appeared in the output at ordinary detail with nothing below it, even though its truncated ancestor still held the full-detail geometry. Write the children on whichever pass first tiles the tile instead. The dropping thresholds only ever increase within a zoom, so for a revived tile that is exactly the pass on which the zoom started dropping. Also collect the three thresholds into dropping_features(), since write_tile() and run_thread() have to agree about when truncation is disabled and when a skipped tile comes back. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Treat dropping by attribute like the other ways of dropping features --drop-by-attribute-as-needed was added after variable-depth pyramids, and minattribute never made it into the test for whether a zoom level is discarding features. A zoom that was dropping by attribute could still truncate pyramids, so some of its tiles became full-detail leaves while the rest of the zoom had features dropped out of them, and tiles skipped because an ancestor had truncated stayed missing. Unlike the other thresholds, minattribute starts at the infinity on whichever side is being kept rather than at zero, so dropping_features() now takes the direction too. On tests/tl_2022_11_tract at -Z10 -M15000, zoom 11 was dropping by attribute and truncating two pyramids at the same time; now it truncates none of them and the tile that had been skipped under zoom 10's truncation is written out. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Delete the merged tile that the deduplication test leaves behind overzoom-test removes merged-dedup.pbf.json.check but not the merged-dedup.pbf it was decoded from, so the file was left in the working tree after every test run. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Document what variable-depth pyramids now do to geometry and to dropping Truncated tiles are no longer left uncleaned: they keep every vertex that isn't collinear with its neighbors, but their polygons are cleaned so that overlapping areas are merged instead of stacked. Say so, and say that dropping features at a zoom level now suppresses truncation for the whole zoom rather than for individual tiles. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Start minattribute out at the infinity that excludes nothing dropping_features() reads write_tile_args::minattribute, and the in-class default of 0 decodes as a threshold that has already been chosen. Every path assigns it from zoom_minattribute before anything reads it, so this changes no behavior, but a future one that didn't would silently suppress pyramid truncation rather than fail visibly. -HUGE_VAL is the value that excludes nothing for the ascending order that drop_by_attribute_descending also defaults to, so the two members agree. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Regenerate the drop-by-attribute fixture through the test harness The Makefile can't be asked for a target whose name contains an =, since make reads that as a variable assignment, so this fixture was generated by hand into a scratch directory. The output path ends up in the tileset's name, description, and generator_options, and tippecanoe-decode is only passed -x generator, so all three were compared against the harness's .check.mbtiles path and could never match. make test failed on it. Regenerated with the same output path the rule uses. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Restore the -z14 -M25000 variable-depth fixture This configuration was dropped rather than regenerated when the -z17 -M10000 fixture was added. It still runs, so it was losing a passing regression test for no stated reason. Regenerated against current behavior. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Encode the = in the drop-by-attribute fixture name as %3d A test output name containing an = can't be asked for on the make command line, because make reads that argument as a variable assignment, so the fixture couldn't be regenerated through its own rule. Add %3d to the punctuation escapes that testargs decodes and use it here. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp * Regenerate the man page for the README change The variable-depth pyramid option's description changed, and man/tippecanoe.1 is generated from README.md, so the committed page no longer matched. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KewFM6XCt5W9QBZkTZDjCp --------- Co-authored-by: Claude <noreply@anthropic.com>
677 lines
58 KiB
Makefile
677 lines
58 KiB
Makefile
PREFIX ?= /usr/local
|
|
MANDIR ?= $(PREFIX)/share/man/man1/
|
|
BUILDTYPE ?= Release
|
|
BUILD_INFO ?=
|
|
SHELL = /bin/sh
|
|
|
|
|
|
# inherit from env if set
|
|
CC := $(CC)
|
|
CXX := $(CXX)
|
|
CFLAGS := $(CFLAGS) -fPIE -DBUILD_INFO=$(BUILD_INFO)
|
|
CXXFLAGS := $(CXXFLAGS) -std=c++17 -fPIE -DBUILD_INFO=$(BUILD_INFO)
|
|
LDFLAGS := $(LDFLAGS)
|
|
WARNING_FLAGS := -Wall -Wshadow -Wsign-compare -Wextra -Wunreachable-code -Wuninitialized -Wshadow -Wvla
|
|
RELEASE_FLAGS := -O3 -DNDEBUG
|
|
DEBUG_FLAGS := -O0 -DDEBUG -fno-inline-functions -fno-omit-frame-pointer
|
|
|
|
|
|
OS := $(shell uname -s)
|
|
ifeq ($(OS),FreeBSD)
|
|
ADVSHELL = /usr/local/bin/bash
|
|
else
|
|
ADVSHELL = /bin/bash
|
|
endif
|
|
|
|
|
|
ifeq ($(BUILDTYPE),Release)
|
|
FINAL_FLAGS := -g $(WARNING_FLAGS) $(RELEASE_FLAGS)
|
|
else
|
|
FINAL_FLAGS := -g $(WARNING_FLAGS) $(DEBUG_FLAGS)
|
|
endif
|
|
|
|
all: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join unit tippecanoe-json-tool tippecanoe-overzoom
|
|
|
|
docs: man/tippecanoe.1
|
|
|
|
install: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join tippecanoe-json-tool tippecanoe-overzoom
|
|
mkdir -p $(PREFIX)/bin
|
|
mkdir -p $(MANDIR)
|
|
cp tippecanoe $(PREFIX)/bin/tippecanoe
|
|
cp tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-enumerate
|
|
cp tippecanoe-decode $(PREFIX)/bin/tippecanoe-decode
|
|
cp tippecanoe-json-tool $(PREFIX)/bin/tippecanoe-json-tool
|
|
cp tippecanoe-overzoom $(PREFIX)/bin/tippecanoe-overzoom
|
|
cp tile-join $(PREFIX)/bin/tile-join
|
|
cp man/tippecanoe.1 $(MANDIR)/tippecanoe.1
|
|
|
|
uninstall:
|
|
rm $(PREFIX)/bin/tippecanoe $(PREFIX)/bin/tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-decode $(PREFIX)/bin/tile-join $(MANDIR)/tippecanoe.1 $(PREFIX)/bin/tippecanoe-json-tool
|
|
|
|
# The man page is generated from README.md by go-md2man, which is packaged for
|
|
# most systems (`brew install go-md2man`, `apt-get install go-md2man`) or can be
|
|
# built with `go install github.com/cpuguy83/go-md2man/v2@v2.0.7`. CI checks that
|
|
# the committed man page matches the README, so you don't have to regenerate it
|
|
# yourself if you don't have go-md2man installed.
|
|
#
|
|
# README.md has no .TH or NAME section of its own, since neither would make sense
|
|
# on GitHub, so prepend them here. go-md2man reads the leading "%" line as the
|
|
# man page's title, section, date, and source. The version deliberately doesn't
|
|
# appear there: it would make this page a build product of version.hpp, so every
|
|
# release would have to regenerate it just to rewrite that one line, and the docs
|
|
# CI job would fail on any version bump that forgot to.
|
|
#
|
|
# Two fixups on the way out:
|
|
#
|
|
# - README.md's own title heading becomes the second .SH, right below the NAME
|
|
# section added above, which reads as a stray "tippecanoe" section. Rename it
|
|
# to DESCRIPTION, where the text under it belongs anyway.
|
|
# - go-md2man separates paragraphs with a blank line in addition to the .PP
|
|
# macro, and a blank line is itself a break in roff, so the two together
|
|
# double-space the whole page. Drop them, except within .EX and .TS blocks,
|
|
# where a blank line is part of the example or table rather than spacing.
|
|
man/tippecanoe.1: README.md
|
|
{ \
|
|
echo '% TIPPECANOE 1 "" "tippecanoe"'; \
|
|
echo; \
|
|
echo '# NAME'; \
|
|
echo; \
|
|
echo 'tippecanoe - build vector tilesets from GeoJSON, FlatGeobuf, or CSV features'; \
|
|
echo; \
|
|
cat README.md; \
|
|
} | go-md2man \
|
|
| awk ' \
|
|
/^\.SH / && ++sh == 2 { print ".SH DESCRIPTION"; next } \
|
|
/^\.(EX|TS)$$/ { lit = 1 } \
|
|
/^\.(EE|TE)$$/ { lit = 0 } \
|
|
lit || !/^$$/ \
|
|
' > $@.tmp && mv $@.tmp $@
|
|
|
|
PG=
|
|
|
|
H = $(wildcard *.h) $(wildcard *.hpp)
|
|
C = $(wildcard *.c) $(wildcard *.cpp)
|
|
|
|
INCLUDES = -I/usr/local/include -I. -Iclipper2/include
|
|
LIBS = -L/usr/local/lib
|
|
|
|
tippecanoe: geojson.o jsonpull/jsonpull.o tile.o pool.o mbtiles.o geometry.o projection.o memfile.o mvt.o serial.o main.o platform.o text.o dirtiles.o pmtiles_file.o plugin.o read_json.o write_json.o geobuf.o flatgeobuf.o evaluator.o geocsv.o csv.o geojson-loop.o json_logger.o visvalingam.o compression.o clip.o sort.o attribute.o thread.o shared_borders.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-enumerate: enumerate.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lsqlite3
|
|
|
|
tippecanoe-decode: decode.o projection.o mvt.o write_json.o text.o jsonpull/jsonpull.o dirtiles.o pmtiles_file.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3
|
|
|
|
tile-join: tile-join.o platform.o projection.o mbtiles.o mvt.o memfile.o dirtiles.o jsonpull/jsonpull.o text.o evaluator.o csv.o write_json.o pmtiles_file.o clip.o attribute.o thread.o read_json.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-json-tool: jsontool.o jsonpull/jsonpull.o csv.o text.o geojson-loop.o usage.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
unit: unit.o text.o sort.o mvt.o projection.o clip.o attribute.o jsonpull/jsonpull.o evaluator.o read_json.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
tippecanoe-overzoom: overzoom.o mvt.o clip.o evaluator.o jsonpull/jsonpull.o text.o attribute.o read_json.o projection.o read_json.o usage.o clipper2/src/clipper.engine.o
|
|
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
|
|
|
|
-include $(wildcard *.d)
|
|
|
|
%.o: %.c
|
|
$(CC) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CFLAGS) -c -o $@ $<
|
|
|
|
%.o: %.cpp
|
|
$(CXX) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CXXFLAGS) -c -o $@ $<
|
|
|
|
clean:
|
|
rm -f ./tippecanoe ./tippecanoe-* ./tile-join ./unit *.o *.d */*.o */*.d tests/**/*.mbtiles tests/**/*.check
|
|
|
|
indent:
|
|
clang-format -i -style="{BasedOnStyle: Google, IndentWidth: 8, UseTab: Always, AllowShortIfStatementsOnASingleLine: false, ColumnLimit: 0, ContinuationIndentWidth: 8, SpaceAfterCStyleCast: true, IndentCaseLabels: false, AllowShortBlocksOnASingleLine: false, AllowShortFunctionsOnASingleLine: false, SortIncludes: false}" $(filter-out flatgeobuf.cpp,$(C)) $(H) jsonpull/*.[ch]
|
|
|
|
TESTS = $(wildcard tests/*/out/*.json)
|
|
SPACE = $(NULL) $(NULL)
|
|
|
|
test: tippecanoe tippecanoe-decode $(addsuffix .check,$(TESTS)) raw-tiles-test parallel-test radix-sort-test pbf-test join-test enumerate-test decode-test join-filter-test unit json-tool-test allow-existing-test csv-test layer-json-test pmtiles-test decode-pmtiles-test overzoom-test flatgeobuf-test
|
|
./unit
|
|
|
|
suffixes = json json.gz
|
|
|
|
# Work around Makefile and filename punctuation limits:
|
|
# _ for argument-separator space
|
|
# %20 for quoted space
|
|
# %22 for quoted quote
|
|
# %2f for /
|
|
# %3a for :
|
|
# %3d for =
|
|
# %5f for _
|
|
# %7b for {
|
|
|
|
testargs = \
|
|
$(subst %20,' ',\
|
|
$(subst %22,'"',\
|
|
$(subst %3a,:,\
|
|
$(subst %3d,=,\
|
|
$(subst %2f,/,\
|
|
$(subst %7b,'{',\
|
|
$(subst %5f,'_',\
|
|
$(subst _, ,$(1)))))))))
|
|
|
|
%.json.check:
|
|
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.check,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix)))) < /dev/null
|
|
./tippecanoe-decode -x generator $@.mbtiles > $@.out
|
|
cmp $@.out $(patsubst %.check,%,$@)
|
|
rm $@.out $@.mbtiles
|
|
|
|
# Don't test overflow with geobuf, because it fails (https://github.com/mapbox/geobuf/issues/87)
|
|
# Don't test stringids with geobuf, because it fails
|
|
nogeobuf = tests/overflow/out/-z0.json $(wildcard tests/stringid/out/*.json)
|
|
geobuf-test: tippecanoe-json-tool $(addsuffix .checkbuf,$(filter-out $(nogeobuf),$(TESTS)))
|
|
|
|
# For quicker address sanitizer build, hope that regular JSON parsing is tested enough by parallel and join tests
|
|
fewer-tests: tippecanoe tippecanoe-decode geobuf-test raw-tiles-test parallel-test radix-sort-test pbf-test join-test enumerate-test decode-test join-filter-test unit
|
|
|
|
# XXX Use proper makefile rules instead of a for loop
|
|
%.json.checkbuf:
|
|
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json); do ./tippecanoe-json-tool -w $$i | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
|
|
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json.gz); do gzip -dc $$i | ./tippecanoe-json-tool -w | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
|
|
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.checkbuf,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(addsuffix .geobuf,$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))) < /dev/null
|
|
./tippecanoe-decode -x generator $@.mbtiles | sed 's/checkbuf/check/g' | sed 's/\.geobuf//g' > $@.out
|
|
cmp $@.out $(patsubst %.checkbuf,%,$@)
|
|
rm $@.out $@.mbtiles
|
|
|
|
# The result of the sort must not depend on how the sort was performed, so instead of
|
|
# checking the sorted output against an expected copy of it, check that sorting by radix
|
|
# produces the same tiles as sorting in memory. --prefer-radix-sort lowers the memory
|
|
# limit to 8K, which radix() then halves again, so the radix subdivision has to recurse
|
|
# until each bucket is under 4K. How deeply that recurses depends on how many files the
|
|
# machine will let us open at once, but the sorted result is the same either way, so
|
|
# this comparison doesn't depend on that.
|
|
#
|
|
# What sends the sort down its rarely-taken paths is the shape of the input rather than
|
|
# the size of it: a feature whose geometry alone is bigger than the memory limit is
|
|
# sorted as a bucket of its own, and features that share a long run of leading index
|
|
# bits have to be subdivided until there are no bits left. The first two inputs are
|
|
# each one of those on purpose -- several separated features too big to sort in memory,
|
|
# and many features at one location -- and the rest are for breadth.
|
|
radix-sort-test: tippecanoe tippecanoe-decode
|
|
mkdir -p tests/radix-sort
|
|
perl -e 'for ($$f = 0; $$f < 8; $$f++) { print "{ \"type\": \"Feature\", \"properties\": { \"f\": $$f }, \"geometry\": { \"type\": \"LineString\", \"coordinates\": ["; for ($$i = 0; $$i < 2000; $$i++) { print "," unless $$i == 0; printf "[%f,%f]", $$f * 40 - 175 + $$i * 0.001, $$i % 2 * 0.5 - 20; } print "] } }\n"; }' > tests/radix-sort/bigfeatures.json
|
|
perl -e 'for ($$i = 0; $$i < 500; $$i++) { print "{ \"type\": \"Feature\", \"properties\": { \"i\": $$i }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ 17, 42 ] } }\n"; }' > tests/radix-sort/onelocation.json
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/radix-sort/bigfeatures.json" RADIXARGS="-z4"
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/radix-sort/onelocation.json" RADIXARGS="-z4"
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/feature-filter/in.json" RADIXARGS="-z4"
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/ne_110m_ocean/in.json" RADIXARGS="-z4"
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/border/in.json" RADIXARGS="-z4"
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/loop/in.json" RADIXARGS="-z4"
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/tl_2022_11_tract/in.json.gz" RADIXARGS="-z4"
|
|
$(MAKE) radix-sort-compare RADIXIN="tests/epsg-3857/in.json" RADIXARGS="-z4 -sEPSG:3857"
|
|
rm -r tests/radix-sort
|
|
|
|
radix-sort-compare:
|
|
./tippecanoe -q -f $(RADIXARGS) -o tests/radix-sort/memory.mbtiles $(RADIXIN)
|
|
./tippecanoe -q -f $(RADIXARGS) -aR -o tests/radix-sort/radix.mbtiles $(RADIXIN)
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/radix-sort/memory.mbtiles > tests/radix-sort/memory.json
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/radix-sort/radix.mbtiles > tests/radix-sort/radix.json
|
|
cmp tests/radix-sort/memory.json tests/radix-sort/radix.json
|
|
rm tests/radix-sort/memory.mbtiles tests/radix-sort/radix.mbtiles tests/radix-sort/memory.json tests/radix-sort/radix.json
|
|
|
|
parallel-test: $(eval SHELL:=$(ADVSHELL))
|
|
mkdir -p tests/parallel
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$k = rand(1); $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { \"yes\": \"no\", \"who\": 1, \"$$k\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in1.json
|
|
perl -e 'for ($$i = 0; $$i < 300000; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in2.json
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in3.json
|
|
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { }, \"tippecanoe\": { \"layer\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in4.json
|
|
echo -n "" > tests/parallel/empty1.json
|
|
echo "" > tests/parallel/empty2.json
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
|
|
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-pipe.mbtiles
|
|
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipe.mbtiles
|
|
cat tests/parallel/in[1234].json | sed 's/^/@/' | tr '@' '\036' | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/implicit-pipe.mbtiles
|
|
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipes.mbtiles <(cat tests/parallel/in1.json) <(cat tests/parallel/empty1.json) <(cat tests/parallel/empty2.json) <(cat tests/parallel/in2.json) /dev/null <(cat tests/parallel/in3.json) <(cat tests/parallel/in4.json)
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-file.mbtiles > tests/parallel/linear-file.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-file.mbtiles > tests/parallel/parallel-file.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-pipe.mbtiles > tests/parallel/linear-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipe.mbtiles > tests/parallel/parallel-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/implicit-pipe.mbtiles > tests/parallel/implicit-pipe.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipes.mbtiles > tests/parallel/parallel-pipes.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-file.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/linear-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/implicit-pipe.json
|
|
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipes.json
|
|
rm tests/parallel/*.mbtiles tests/parallel/*.json
|
|
|
|
raw-tiles-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -e tests/raw-tiles/raw-tiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles.json.check
|
|
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
|
|
# Test that -z and -Z work in tippecanoe-decode
|
|
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles-z67.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
|
|
# Test that -z and -Z work in tile-join
|
|
./tile-join -q -f -Z6 -z7 -e tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67 > tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
|
|
rm -rf tests/raw-tiles/raw-tiles tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
# Test that metadata.json is created even if all features are clipped away
|
|
./tippecanoe -q -f -e tests/raw-tiles/nothing tests/raw-tiles/nothing.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/nothing > tests/raw-tiles/nothing.json.check
|
|
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
|
|
rm -r tests/raw-tiles/nothing tests/raw-tiles/nothing.json.check
|
|
|
|
pmtiles-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -o tests/pmtiles/hackspots.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/pmtiles/hackspots.pmtiles > tests/pmtiles/hackspots.json.check
|
|
cmp tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.json
|
|
# Test generating pmtiles first and then converting to mbtiles with tile-join.
|
|
./tile-join -q -f -pC -o tests/pmtiles/joined.mbtiles tests/pmtiles/hackspots.pmtiles
|
|
./tippecanoe-decode -x generator tests/pmtiles/joined.mbtiles > tests/pmtiles/joined.json.check
|
|
cmp tests/pmtiles/joined.json.check tests/pmtiles/joined.json
|
|
rm -r tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.pmtiles
|
|
|
|
# Test generating mbtiles first and then converting to pmtiles with tile-join. (Changes bounds)
|
|
./tippecanoe -q -f -o tests/pmtiles/hackspots.mbtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tile-join -q -f -pC -o tests/pmtiles/joined.pmtiles tests/pmtiles/hackspots.mbtiles
|
|
|
|
# decode changes order (ZXY vs TMS order)
|
|
./tippecanoe-decode -x generator tests/pmtiles/joined.pmtiles > tests/pmtiles/joined_reordered.json.check
|
|
cmp tests/pmtiles/joined_reordered.json.check tests/pmtiles/joined_reordered.json
|
|
rm -r tests/pmtiles/joined_reordered.json.check tests/pmtiles/hackspots.mbtiles tests/pmtiles/joined.pmtiles
|
|
|
|
# From raw-tiles-test:
|
|
./tippecanoe -q -f -o tests/raw-tiles/raw-tiles.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles.json.check
|
|
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
|
|
# Test that -z and -Z work in tippecanoe-decode
|
|
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
|
|
# Test that -z and -Z work in tile-join
|
|
./tile-join -q -f -Z6 -z7 -o tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.pmtiles
|
|
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
|
|
rm -rf tests/raw-tiles/raw-tiles.pmtiles tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
|
|
# Test that metadata.json is created even if all features are clipped away
|
|
./tippecanoe -q -f -o tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.geojson
|
|
./tippecanoe-decode -x generator tests/raw-tiles/nothing.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/nothing.json.check
|
|
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
|
|
rm -r tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.json.check
|
|
|
|
decode-test: tippecanoe tippecanoe-decode
|
|
mkdir -p tests/muni/decode
|
|
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.mbtiles tests/muni/*.json
|
|
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.integer.json.check
|
|
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.fraction.json.check
|
|
./tippecanoe-decode -x generator -c tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.pipeline.json.check
|
|
./tippecanoe-decode -x generator tests/muni/decode/multi.mbtiles 11 327 791 > tests/muni/decode/multi.mbtiles.onetile.json.check
|
|
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.stats.json.check
|
|
cmp tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles.json
|
|
cmp tests/muni/decode/multi.mbtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
|
|
cmp tests/muni/decode/multi.mbtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
|
|
cmp tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
|
|
cmp tests/muni/decode/multi.mbtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
|
|
cmp tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
|
|
rm -f tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.onetile.json.check
|
|
|
|
decode-pmtiles-test: tippecanoe tippecanoe-decode
|
|
mkdir -p tests/muni/decode
|
|
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.pmtiles tests/muni/*.json
|
|
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.json.check
|
|
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.integer.json.check
|
|
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.fraction.json.check
|
|
./tippecanoe-decode -x generator -c tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.pipeline.json.check
|
|
./tippecanoe-decode -x generator tests/muni/decode/multi.pmtiles 11 327 791 | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.onetile.json.check
|
|
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.stats.json.check
|
|
cmp tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.mbtiles.json
|
|
cmp tests/muni/decode/multi.pmtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
|
|
cmp tests/muni/decode/multi.pmtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
|
|
cmp tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
|
|
cmp tests/muni/decode/multi.pmtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
|
|
cmp tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
|
|
rm -f tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.pmtiles tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.pmtiles.onetile.json.check
|
|
|
|
pbf-test: tippecanoe-decode
|
|
./tippecanoe-decode -x generator tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.vector.pbf.out
|
|
cmp tests/pbf/11-328-791.json tests/pbf/11-328-791.vector.pbf.out
|
|
rm tests/pbf/11-328-791.vector.pbf.out
|
|
./tippecanoe-decode -x generator -s EPSG:3857 tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.3857.vector.pbf.out
|
|
cmp tests/pbf/11-328-791.3857.json tests/pbf/11-328-791.3857.vector.pbf.out
|
|
rm tests/pbf/11-328-791.3857.vector.pbf.out
|
|
|
|
enumerate-test: tippecanoe tippecanoe-enumerate
|
|
./tippecanoe -q -z5 -f -o tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
|
|
./tippecanoe-enumerate tests/ne_110m_admin_0_countries/out/enum.mbtiles > tests/ne_110m_admin_0_countries/out/enum.check
|
|
cmp tests/ne_110m_admin_0_countries/out/enum.check tests/ne_110m_admin_0_countries/out/enum
|
|
rm tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/out/enum.check
|
|
|
|
overzoom-test: tippecanoe-overzoom
|
|
# Basic operation
|
|
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
|
|
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
|
|
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
|
|
# Make sure feature order is stable
|
|
# Large -b20 tile buffer to prevent altering the geometries by clipping
|
|
./tippecanoe-overzoom -b20 --preserve-input-order -o tests/pbf/11-327-791-out.pbf tests/pbf/11-327-791.pbf 11/327/791 11/327/791
|
|
./tippecanoe-decode tests/pbf/11-327-791.pbf 11 327 791 > tests/pbf/11-327-791.json
|
|
./tippecanoe-decode tests/pbf/11-327-791-out.pbf 11 327 791 > tests/pbf/11-327-791-out.json
|
|
cmp tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json
|
|
rm tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json tests/pbf/11-327-791-out.pbf
|
|
# Basic operation, multiple input form
|
|
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791
|
|
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
|
|
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
|
|
# Multiple inputs, no compression
|
|
./tippecanoe-overzoom --no-tile-compression -o tests/pbf/13-1310-3166-ne.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791 tests/pbf/0-0-0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/13-1310-3166-ne.pbf 13 1310 3166 > tests/pbf/13-1310-3166-ne.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166-ne.pbf.json.check tests/pbf/13-1310-3166-ne.pbf.json
|
|
rm tests/pbf/13-1310-3166-ne.pbf tests/pbf/13-1310-3166-ne.pbf.json.check
|
|
# Different detail and buffer, and attribute stripping
|
|
./tippecanoe-overzoom -d8 -b30 -y NAME -y name -y scalerank -o tests/pbf/13-1310-3166-8-30.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
|
|
./tippecanoe-decode tests/pbf/13-1310-3166-8-30.pbf 13 1310 3166 > tests/pbf/13-1310-3166-8-30.pbf.json.check
|
|
cmp tests/pbf/13-1310-3166-8-30.pbf.json.check tests/pbf/13-1310-3166-8-30.pbf.json
|
|
rm tests/pbf/13-1310-3166-8-30.pbf tests/pbf/13-1310-3166-8-30.pbf.json.check
|
|
# No features in child tile
|
|
./tippecanoe-overzoom -o tests/pbf/14-2616-6331.pbf tests/pbf/11-327-791.pbf 11/327/791 14/2616/6331
|
|
cmp tests/pbf/14-2616-6331.pbf /dev/null
|
|
rm tests/pbf/14-2616-6331.pbf
|
|
# Thinning
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 9 of them survive as the best of each cluster of 30
|
|
# ./tippecanoe -z1 -r30 --retain-points-multiplier 30 -f -e out.dir tests/ne_110m_populated_places/in.json
|
|
# cp out.dir/0/0/0.pbf tests/pbf/0-0-0-pop.pbf
|
|
./tippecanoe-overzoom -y NAME -m -o tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-filtered.pbf 0 0 0 > tests/pbf/0-0-0-pop-filtered.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-filtered.pbf.json.check tests/pbf/0-0-0-pop-filtered.pbf.json
|
|
rm tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop-filtered.pbf.json.check
|
|
# Thinning with accumulation
|
|
./tippecanoe-overzoom -y NAME -m --accumulate-attribute NAME:comma -o tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-accum.pbf 0 0 0 > tests/pbf/0-0-0-pop-accum.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-accum.pbf.json.check tests/pbf/0-0-0-pop-accum.pbf.json
|
|
rm tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop-accum.pbf.json.check
|
|
# Filtering
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 27 of them match the filter and are retained
|
|
./tippecanoe-overzoom -y NAME -j'{"*":["==","SCALERANK",0]}' -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
|
|
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
# Same filter test, but reading the filter from a file
|
|
./tippecanoe-overzoom -y NAME -J tests/pbf/scalerank-0-filter.json -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
|
|
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
|
|
# Filtering with multiplier
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
# 8 features survive into the output, from 9 clusters of 30
|
|
./tippecanoe-overzoom -y NAME -y SCALERANK -j'{"*":["==","SCALERANK",0]}' -m -o tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-filter-mult.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult.pbf.json.check
|
|
cmp tests/pbf/0-0-0-filter-mult.pbf.json.check tests/pbf/0-0-0-filter-mult.pbf.json
|
|
rm tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-filter-mult.pbf.json.check
|
|
# Filtering with multiplier and preserve-input-order
|
|
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
|
|
./tippecanoe-overzoom -y NAME -y SCALERANK -y LATITUDE -j'{"*":[">","LATITUDE",40]}' -m --preserve-input-order -o tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/0-0-0-filter-mult-order.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult-order.pbf.json.check
|
|
cmp tests/pbf/0-0-0-filter-mult-order.pbf.json.check tests/pbf/0-0-0-filter-mult-order.pbf.json
|
|
rm tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-filter-mult-order.pbf.json.check
|
|
# Test that overzooming with a multiplier exactly reverses the effect of tiling with a multiplier
|
|
./tippecanoe -q -z5 --preserve-point-density-threshold 8 --retain-points-multiplier 3 -f -e tests/muni/out/out.dir tests/muni/muni.json
|
|
./tippecanoe -q -z5 --preserve-point-density-threshold 8 -f -o tests/muni/out/out.mbtiles tests/muni/muni.json
|
|
./tippecanoe-overzoom -m -o tests/muni/out/out.dir/000.pbf tests/muni/out/out.dir/0/0/0.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/muni/out/out.mbtiles 0 0 0 > tests/muni/out/out.dir/direct.json
|
|
./tippecanoe-decode tests/muni/out/out.dir/000.pbf 0 0 0 > tests/muni/out/out.dir/overzoomed.json
|
|
cmp tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
|
|
rm -rf tests/muni/out/out.dir tests/muni/out/out.mbtiles tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
|
|
# Tiny polygon reduction
|
|
./tippecanoe-overzoom --line-simplification=5 --tiny-polygon-size=50 -o tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf 0/0/0 0/0/0
|
|
./tippecanoe-decode tests/pbf/countries-0-0-0.pbf.out 0 0 0 > tests/pbf/countries-0-0-0.pbf.out.json.check
|
|
cmp tests/pbf/countries-0-0-0.pbf.out.json.check tests/pbf/countries-0-0-0.pbf.out.json
|
|
rm tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf.out.json.check
|
|
# Deduplication by feature ID
|
|
./tippecanoe -z0 -f -e tests/pbf/1.json.dir -l layer tests/pbf/1.json
|
|
./tippecanoe -z0 -f -e tests/pbf/2.json.dir -l layer tests/pbf/2.json
|
|
./tippecanoe-overzoom -b0 -o tests/pbf/merged-nodedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/merged-nodedup.pbf 1 1 0 > tests/pbf/merged-nodedup.pbf.json.check
|
|
cmp tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-nodedup.pbf.json
|
|
./tippecanoe-overzoom -b0 --deduplicate-by-id -o tests/pbf/merged-dedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
|
|
./tippecanoe-decode tests/pbf/merged-dedup.pbf 1 1 0 > tests/pbf/merged-dedup.pbf.json.check
|
|
cmp tests/pbf/merged-dedup.pbf.json.check tests/pbf/merged-dedup.pbf.json
|
|
rm -r tests/pbf/1.json.dir tests/pbf/2.json.dir tests/pbf/merged-nodedup.pbf tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-dedup.pbf tests/pbf/merged-dedup.pbf.json.check
|
|
|
|
join-test: tippecanoe tippecanoe-decode tile-join
|
|
./tippecanoe -q -f -z12 -o tests/join-population/tabblock_06001420.mbtiles -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur tests/join-population/macarthur.json
|
|
./tile-join -q -f -Z6 -z9 -o tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9.mbtiles > tests/join-population/macarthur-6-9.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles.json
|
|
./tile-join -q -f -Z6 -z9 -X -o tests/join-population/macarthur-6-9-exclude.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9-exclude.mbtiles > tests/join-population/macarthur-6-9-exclude.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles.json
|
|
rm -f tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles
|
|
./tippecanoe -q -f -d10 -D10 -Z9 -z11 -o tests/join-population/macarthur2.mbtiles -l macarthur tests/join-population/macarthur2.json
|
|
./tile-join --quiet --force -o tests/join-population/joined.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force -o tests/join-population/joined-null.mbtiles --empty-csv-columns-are-null -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --no-tile-stats -o tests/join-population/joined-no-tile-stats.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-attributes-limit=1 -o tests/join-population/joined-tile-stats-attributes-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-sample-values-limit=1 -o tests/join-population/joined-tile-stats-sample-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join --quiet --force --tile-stats-values-limit=1 -o tests/join-population/joined-tile-stats-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join -q -f -i -o tests/join-population/joined-i.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
|
|
./tile-join -q -f -o tests/join-population/merged.mbtiles tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined.mbtiles > tests/join-population/joined.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-null.mbtiles > tests/join-population/joined-null.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-no-tile-stats.mbtiles > tests/join-population/joined-no-tile-stats.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-attributes-limit.mbtiles > tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-values-limit.mbtiles > tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-sample-values-limit.mbtiles > tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/joined-i.mbtiles > tests/join-population/joined-i.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/merged.mbtiles > tests/join-population/merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/windows.mbtiles > tests/join-population/windows.mbtiles.json.check
|
|
cmp tests/join-population/joined.mbtiles.json.check tests/join-population/joined.mbtiles.json
|
|
cmp tests/join-population/joined-null.mbtiles.json.check tests/join-population/joined-null.mbtiles.json
|
|
cmp tests/join-population/joined-no-tile-stats.mbtiles.json.check tests/join-population/joined-no-tile-stats.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json
|
|
cmp tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-values-limit.mbtiles.json
|
|
cmp tests/join-population/joined-i.mbtiles.json.check tests/join-population/joined-i.mbtiles.json
|
|
cmp tests/join-population/merged.mbtiles.json.check tests/join-population/merged.mbtiles.json
|
|
cmp tests/join-population/windows.mbtiles.json.check tests/join-population/windows.mbtiles.json
|
|
rm -f tests/join-population/joined-null.mbtiles tests/join-population/joined-null.mbtiles.json.check
|
|
./tile-join -q -f -l macarthur -n "macarthur name" -N "macarthur description" -A "macarthur's attribution" -o tests/join-population/just-macarthur.mbtiles tests/join-population/merged.mbtiles
|
|
./tile-join -q -f -L macarthur -o tests/join-population/no-macarthur.mbtiles tests/join-population/merged.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/just-macarthur.mbtiles > tests/join-population/just-macarthur.mbtiles.json.check
|
|
./tippecanoe-decode -x generator tests/join-population/no-macarthur.mbtiles > tests/join-population/no-macarthur.mbtiles.json.check
|
|
cmp tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/just-macarthur.mbtiles.json
|
|
cmp tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json
|
|
./tile-join -q --no-tile-compression -f -e tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/raw-merged-folder > tests/join-population/raw-merged-folder.json.check
|
|
cmp tests/join-population/raw-merged-folder.json.check tests/join-population/raw-merged-folder.json
|
|
rm -f tests/join-population/raw-merged-folder.json.check
|
|
./tippecanoe -q -z12 -f -e tests/join-population/tabblock_06001420-folder -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
|
|
./tippecanoe -q -Z5 -z10 -f -e tests/join-population/macarthur-folder -l macarthur tests/join-population/macarthur.json
|
|
./tippecanoe -q -d10 -D10 -Z9 -z11 -f -e tests/join-population/macarthur2-folder -l macarthur tests/join-population/macarthur2.json
|
|
./tile-join -q -f -o tests/join-population/merged-folder.mbtiles tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
|
|
./tippecanoe-decode -x generator tests/join-population/merged-folder.mbtiles > tests/join-population/merged-folder.mbtiles.json.check
|
|
cmp tests/join-population/merged-folder.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json
|
|
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-mbtiles-to-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-folders-to-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-mbtiles-to-folder > tests/join-population/merged-mbtiles-to-folder.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-folders-to-folder > tests/join-population/merged-folders-to-folder.json.check
|
|
cmp tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
|
|
rm -f tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
|
|
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -c tests/join-population/windows.csv -f -e tests/join-population/windows-merged-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -o tests/join-population/windows-merged2.mbtiles tests/join-population/windows-merged-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged.mbtiles > tests/join-population/windows-merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged2.mbtiles > tests/join-population/windows-merged2.mbtiles.json.check
|
|
cmp tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check
|
|
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -e tests/join-population/macarthur-and-macarthur2-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
|
|
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-folder
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged.mbtiles > tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check
|
|
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged2.mbtiles > tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
cmp tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
rm tests/join-population/tabblock_06001420.mbtiles tests/join-population/joined.mbtiles tests/join-population/joined-i.mbtiles tests/join-population/joined.mbtiles.json.check tests/join-population/joined-i.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/merged.mbtiles tests/join-population/merged.mbtiles.json.check tests/join-population/merged-folder.mbtiles tests/join-population/macarthur2.mbtiles tests/join-population/windows.mbtiles tests/join-population/windows-merged.mbtiles tests/join-population/windows-merged2.mbtiles tests/join-population/windows.mbtiles.json.check tests/join-population/just-macarthur.mbtiles tests/join-population/no-macarthur.mbtiles tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json.check tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
|
|
rm -rf tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder tests/join-population/merged-mbtiles-to-folder tests/join-population/merged-folders-to-folder tests/join-population/windows-merged-folder tests/join-population/macarthur-and-macarthur2-folder
|
|
# Test renaming of layers
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/join-population/renamed.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/renamed.mbtiles > tests/join-population/renamed.mbtiles.json.check
|
|
cmp tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json
|
|
rm -f tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
|
|
# Make sure the concatenated name isn't too long
|
|
./tippecanoe -q -f -z0 -n 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' -o tests/join-population/macarthur.mbtiles tests/join-population/macarthur.json
|
|
./tile-join -f -o tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles
|
|
./tippecanoe-decode -x generator tests/join-population/concat.mbtiles > tests/join-population/concat.mbtiles.json.check
|
|
cmp tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles.json
|
|
rm tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles
|
|
# Test reading list of input files from file
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
|
|
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/readfile/renamed.mbtiles tests/readfile/macarthur.mbtiles tests/readfile/macarthur2.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options tests/readfile/renamed.mbtiles > tests/readfile/renamed.mbtiles.json.check
|
|
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -r tests/readfile/readfile.list -o tests/readfile/readfile.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options tests/readfile/readfile.mbtiles > tests/readfile/readfile.mbtiles.json.check
|
|
cmp tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check
|
|
rm tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check tests/readfile/readfile.mbtiles tests/readfile/renamed.mbtiles
|
|
#`
|
|
# Make sure empty tilesets work
|
|
#
|
|
# mbtiles:
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.mbtiles tests/join-population/empty.json
|
|
./tile-join -f -o tests/join-population/empty.out.mbtiles tests/join-population/empty.mbtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.mbtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.mbtiles tests/join-population/empty.out.mbtiles tests/join-population/empty.out.json.check
|
|
# pmtiles:
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
|
|
./tile-join -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
|
|
# pmtiles again, with --overzoom
|
|
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
|
|
./tile-join --overzoom -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
|
|
# dirtiles:
|
|
./tippecanoe -q -z0 -f -e tests/join-population/empty.dirtiles tests/join-population/empty.json
|
|
./tile-join -f -e tests/join-population/empty.out.dirtiles tests/join-population/empty.dirtiles
|
|
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.dirtiles > tests/join-population/empty.out.json.check
|
|
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
|
|
rm -rf tests/join-population/empty.dirtiles tests/join-population/empty.out.dirtiles tests/join-population/empty.out.json.check
|
|
#
|
|
# Test overzooming of tilesets with different maxzooms
|
|
#
|
|
mkdir -p tests/ne_110m_ocean/join
|
|
./tippecanoe -q -z2 -f -o tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/in.json
|
|
./tippecanoe -q -z4 -d8 -y name -f -o tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
|
|
./tile-join --overzoom -f -o tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles
|
|
./tippecanoe-decode -x generator tests/ne_110m_ocean/join/joined.mbtiles > tests/ne_110m_ocean/join/joined.mbtiles.json.check
|
|
cmp tests/ne_110m_ocean/join/joined.mbtiles.json.check tests/ne_110m_ocean/join/joined.mbtiles.json
|
|
rm -f tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/joined.mbtiles.json.check
|
|
|
|
join-filter-test: tippecanoe tippecanoe-decode tile-join
|
|
# Comes out different from the direct tippecanoe run because null attributes are lost
|
|
./tippecanoe -q -z0 -f -o tests/feature-filter/out/all.mbtiles tests/feature-filter/in.json
|
|
./tile-join -q -J tests/feature-filter/filter -f -o tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
|
|
./tippecanoe-decode -x generator tests/feature-filter/out/filtered.mbtiles > tests/feature-filter/out/filtered.json.check
|
|
cmp tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.json.standard
|
|
rm -f tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
|
|
# Test zoom level filtering
|
|
./tippecanoe -q -r1 -z8 -f -o tests/feature-filter/out/places.mbtiles tests/ne_110m_populated_places/in.json
|
|
./tile-join -q -J tests/feature-filter/places-filter -f -o tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places.mbtiles
|
|
./tippecanoe-decode -x generator tests/feature-filter/out/places-filter.mbtiles > tests/feature-filter/out/places-filter.mbtiles.json.check
|
|
cmp tests/feature-filter/out/places-filter.mbtiles.json.check tests/feature-filter/out/places-filter.mbtiles.json.standard
|
|
rm -f tests/feature-filter/out/places.mbtiles tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places-filter.mbtiles.json.check
|
|
|
|
json-tool-test: tippecanoe-json-tool
|
|
./tippecanoe-json-tool -e GEOID10 tests/join-population/tabblock_06001420.json | sort > tests/join-population/tabblock_06001420.json.sort
|
|
./tippecanoe-json-tool -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420.json.sort.joined
|
|
./tippecanoe-json-tool --empty-csv-columns-are-null -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420-null.json.sort.joined
|
|
cmp tests/join-population/tabblock_06001420.json.sort.joined tests/join-population/tabblock_06001420.json.sort.joined.standard
|
|
cmp tests/join-population/tabblock_06001420-null.json.sort.joined tests/join-population/tabblock_06001420-null.json.sort.joined.standard
|
|
rm -f tests/join-population/tabblock_06001420.json.sort tests/join-population/tabblock_06001420.json.sort.joined
|
|
rm -f tests/join-population/tabblock_06001420-null.json.sort.joined
|
|
|
|
allow-existing-test: tippecanoe
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.mbtiles > tests/allow-existing/both.mbtiles.json.check
|
|
cmp tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles.json
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe -q -Z10 -z11 -F -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.dir | sed 's/both\.dir/both.mbtiles/g' > tests/allow-existing/both.dir.json.check
|
|
cmp tests/allow-existing/both.dir.json.check tests/allow-existing/both.mbtiles.json
|
|
# Make a tileset
|
|
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Writing to existing should fail
|
|
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
# Replace existing
|
|
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
|
|
# Allow-existing is not supported for pmtiles
|
|
if ./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
|
|
rm -r tests/allow-existing/both.pmtiles tests/allow-existing/both.dir.json.check tests/allow-existing/both.dir tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles
|
|
|
|
csv-test: tippecanoe tippecanoe-decode
|
|
# Reading from named CSV
|
|
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
|
|
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
|
|
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
|
|
# Reading from named CSV, with nulls
|
|
./tippecanoe -q --empty-csv-columns-are-null -zg -f -o tests/csv/out-null.mbtiles tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator tests/csv/out-null.mbtiles > tests/csv/out-null.mbtiles.json.check
|
|
cmp tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles.json
|
|
rm -f tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles
|
|
# Same, but specifying csv with -L format
|
|
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles -L'{"file":"", "format":"csv", "layer":"ne_110m_populated_places_simple"}' < tests/csv/ne_110m_populated_places_simple.csv
|
|
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
|
|
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
|
|
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
|
|
|
|
flatgeobuf-test: tippecanoe tippecanoe-decode
|
|
./tippecanoe -q -f -z0 -l numeric-properties -o tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.fgb
|
|
./tippecanoe-decode tests/flatgeobuf/numeric-properties.mbtiles 0 0 0 > tests/flatgeobuf/numeric-properties.json.check
|
|
cmp tests/flatgeobuf/numeric-properties.json.check tests/flatgeobuf/numeric-properties.json
|
|
rm -f tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.json.check
|
|
|
|
layer-json-test: tippecanoe tippecanoe-decode
|
|
# GeoJSON with description and named layer
|
|
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"tests/ne_110m_populated_places/in.json", "description":"World cities", "layer":"places"}'
|
|
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
|
|
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
|
|
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
|
|
# Same, but reading from the standard input
|
|
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"", "description":"World cities", "layer":"places"}' < tests/ne_110m_populated_places/in.json
|
|
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
|
|
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
|
|
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
|
|
|
|
# Use this target to regenerate the standards that the tests are compared against
|
|
# after making a change that legitimately changes their output
|
|
|
|
prep-test: $(TESTS)
|
|
|
|
tests/%.json: Makefile tippecanoe tippecanoe-decode
|
|
./tippecanoe -q -a@ -f -o $@.check.mbtiles $(call testargs,$(patsubst %.json,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))
|
|
./tippecanoe-decode -x generator $@.check.mbtiles > $@
|
|
cmp $(patsubst %.check,%,$@) $@
|
|
rm $@.check.mbtiles
|