diegoripley/tippecanoe
1
0
Fork 0
mirror of https://github.com/felt/tippecanoe.git synced 2026-10-02 08:25:40 +02:00
Code Issues Packages Projects Releases Wiki Activity
Files
1820630392fb330af10ccae85f751863380cdaea
tippecanoe/Makefile
T
Erica FischerandClaude Opus 5 1820630392 Fix the radix sort, and check that it agrees with the in-memory sort (#404) 
* Don't write an extra byte when the radix sort writes a bucket directly

radix1() writes out a sorted bucket in two places. merge() writes all but
the last byte of each serialized feature and then appends the byte for the
feature minzoom, since the minzoom is the last byte of the feature. The path
taken when a bucket holds only one feature, or when the recursion has
consumed every bit of the index, instead writes the feature's whole
serialized length and then appends another minzoom byte, which is one byte
more than the feature's length prefix says it is. Everything read from the
geometry afterward is then misaligned by a byte.

--prefer-radix-sort lowers the memory limit to 8K so that this code gets
exercised, and any bucket that has to be written directly is enough to
desynchronize the stream, so it fails on several of the existing test
inputs:

    $ ./tippecanoe -q -f -o out.mbtiles -z4 -aR tests/ne_110m_ocean/in.json
    wrong length decoding feature: used 10, len is 33

Write one byte less here too, as merge() does.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011wLk2itWETPBAS9a9yE8zu

* Keep the radix sort from recursing forever when it runs out of files

radix1() subdivides a bucket by the next splitbits bits of the index, and
stops recursing once prefix + splitbits reaches the width of the index.
The number of buckets comes from the number of files still available, which
shrinks at every level, so deep enough recursion reaches availfiles / 4 == 1
and therefore splitbits == 0. At that point the recursion consumes no bits
of the index and availfiles stops shrinking, so prefix never advances and
the recursion has no way to terminate.

A splitbits of 0 also makes the shift that chooses a feature's bucket a
shift by the full width of the index, which is undefined. In practice it
leaves the shift count masked to zero, so the bucket number is the whole
index rather than 0, and writing to that bucket runs off the end of the
arrays of open files.

Require at least two buckets so that each subdivision always consumes at
least one bit of the index and the shift is always in range, and don't
recurse at all when the next level would not have enough files to split
with: sort that bucket in memory instead, even though it is larger than
the memory limit asked for, since that is the only way left to get it
sorted.

--prefer-radix-sort, which lowers the memory limit to 8K so that this code
gets exercised, segfaults on tests/feature-filter/in.json without this:

    $ ./tippecanoe -q -f -o out.mbtiles -z0 -aR tests/feature-filter/in.json
    Segmentation fault

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011wLk2itWETPBAS9a9yE8zu

* Check that the radix sort and the in-memory sort agree

The result of a sort shouldn't depend on how the sort was performed, so
rather than checking the sorted output against a committed copy of it,
check that --prefer-radix-sort, which lowers the memory limit to 8K to
force the radix subdivision to recurse, produces the same tiles as sorting
in memory. Nothing new has to be kept up to date, and the comparison holds
regardless of how deeply the subdivision recurses on a given machine, which
depends on how many files it will let us open at once.

What sends the sort down the paths that are otherwise almost never taken is
the shape of the input rather than the size of it, so two small inputs are
generated for the purpose: several well-separated features that are each
too big to sort in memory, which are each written out as a bucket of their
own, and many features at one location, which have to be subdivided until
there are no index bits left. Between them and tests/feature-filter, all
three of radix1()'s branches are covered, including sorting in memory
because there are no files left to subdivide with.

Both of these inputs fail without the two preceding commits, and every
input here failed before them.

The whole target runs in about ten seconds.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011wLk2itWETPBAS9a9yE8zu

* Record what the shift by the full index width actually did

Say in the comment that masking the shift count to zero makes the bucket
number come out as the whole shifted index, so the writes go somewhere
past the end of the arrays of buckets, rather than only that the shift is
undefined.

Also correct the note on the test: --prefer-radix-sort sets the memory
limit to 8K, but radix() halves it again, so the subdivision is working
against 4K.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011wLk2itWETPBAS9a9yE8zu

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-08-06 16:47:45 -07:00

675 lines
58 KiB
Makefile
Raw Blame History

PREFIX ?= /usr/local
MANDIR ?= $(PREFIX)/share/man/man1/
BUILDTYPE ?= Release
BUILD_INFO ?=
SHELL = /bin/sh
# inherit from env if set
CC := $(CC)
CXX := $(CXX)
CFLAGS := $(CFLAGS) -fPIE -DBUILD_INFO=$(BUILD_INFO)
CXXFLAGS := $(CXXFLAGS) -std=c++17 -fPIE -DBUILD_INFO=$(BUILD_INFO)
LDFLAGS := $(LDFLAGS)
WARNING_FLAGS := -Wall -Wshadow -Wsign-compare -Wextra -Wunreachable-code -Wuninitialized -Wshadow
RELEASE_FLAGS := -O3 -DNDEBUG
DEBUG_FLAGS := -O0 -DDEBUG -fno-inline-functions -fno-omit-frame-pointer
OS := $(shell uname -s)
ifeq ($(OS),FreeBSD)
ADVSHELL = /usr/local/bin/bash
else
ADVSHELL = /bin/bash
endif
ifeq ($(BUILDTYPE),Release)
FINAL_FLAGS := -g $(WARNING_FLAGS) $(RELEASE_FLAGS)
else
FINAL_FLAGS := -g $(WARNING_FLAGS) $(DEBUG_FLAGS)
endif
all: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join unit tippecanoe-json-tool tippecanoe-overzoom
docs: man/tippecanoe.1
install: tippecanoe tippecanoe-enumerate tippecanoe-decode tile-join tippecanoe-json-tool tippecanoe-overzoom
mkdir -p $(PREFIX)/bin
mkdir -p $(MANDIR)
cp tippecanoe $(PREFIX)/bin/tippecanoe
cp tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-enumerate
cp tippecanoe-decode $(PREFIX)/bin/tippecanoe-decode
cp tippecanoe-json-tool $(PREFIX)/bin/tippecanoe-json-tool
cp tippecanoe-overzoom $(PREFIX)/bin/tippecanoe-overzoom
cp tile-join $(PREFIX)/bin/tile-join
cp man/tippecanoe.1 $(MANDIR)/tippecanoe.1
uninstall:
rm $(PREFIX)/bin/tippecanoe $(PREFIX)/bin/tippecanoe-enumerate $(PREFIX)/bin/tippecanoe-decode $(PREFIX)/bin/tile-join $(MANDIR)/tippecanoe.1 $(PREFIX)/bin/tippecanoe-json-tool
# The man page is generated from README.md by go-md2man, which is packaged for
# most systems (`brew install go-md2man`, `apt-get install go-md2man`) or can be
# built with `go install github.com/cpuguy83/go-md2man/v2@v2.0.7`. CI checks that
# the committed man page matches the README, so you don't have to regenerate it
# yourself if you don't have go-md2man installed.
#
# README.md has no .TH or NAME section of its own, since neither would make sense
# on GitHub, so prepend them here. go-md2man reads the leading "%" line as the
# man page's title, section, date, and source. The version deliberately doesn't
# appear there: it would make this page a build product of version.hpp, so every
# release would have to regenerate it just to rewrite that one line, and the docs
# CI job would fail on any version bump that forgot to.
#
# Two fixups on the way out:
#
# - README.md's own title heading becomes the second .SH, right below the NAME
# section added above, which reads as a stray "tippecanoe" section. Rename it
# to DESCRIPTION, where the text under it belongs anyway.
# - go-md2man separates paragraphs with a blank line in addition to the .PP
# macro, and a blank line is itself a break in roff, so the two together
# double-space the whole page. Drop them, except within .EX and .TS blocks,
# where a blank line is part of the example or table rather than spacing.
man/tippecanoe.1: README.md
{ \
echo '% TIPPECANOE 1 "" "tippecanoe"'; \
echo; \
echo '# NAME'; \
echo; \
echo 'tippecanoe - build vector tilesets from GeoJSON, FlatGeobuf, or CSV features'; \
echo; \
cat README.md; \
} | go-md2man \
| awk ' \
/^\.SH / && ++sh == 2 { print ".SH DESCRIPTION"; next } \
/^\.(EX|TS)$$/ { lit = 1 } \
/^\.(EE|TE)$$/ { lit = 0 } \
lit || !/^$$/ \
' > $@.tmp && mv $@.tmp $@
PG=
H = $(wildcard *.h) $(wildcard *.hpp)
C = $(wildcard *.c) $(wildcard *.cpp)
INCLUDES = -I/usr/local/include -I. -Iclipper2/include
LIBS = -L/usr/local/lib
tippecanoe: geojson.o jsonpull/jsonpull.o tile.o pool.o mbtiles.o geometry.o projection.o memfile.o mvt.o serial.o main.o platform.o text.o dirtiles.o pmtiles_file.o plugin.o read_json.o write_json.o geobuf.o flatgeobuf.o evaluator.o geocsv.o csv.o geojson-loop.o json_logger.o visvalingam.o compression.o clip.o sort.o attribute.o thread.o shared_borders.o usage.o clipper2/src/clipper.engine.o
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
tippecanoe-enumerate: enumerate.o usage.o
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lsqlite3
tippecanoe-decode: decode.o projection.o mvt.o write_json.o text.o jsonpull/jsonpull.o dirtiles.o pmtiles_file.o usage.o
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3
tile-join: tile-join.o platform.o projection.o mbtiles.o mvt.o memfile.o dirtiles.o jsonpull/jsonpull.o text.o evaluator.o csv.o write_json.o pmtiles_file.o clip.o attribute.o thread.o read_json.o usage.o clipper2/src/clipper.engine.o
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
tippecanoe-json-tool: jsontool.o jsonpull/jsonpull.o csv.o text.o geojson-loop.o usage.o
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
unit: unit.o text.o sort.o mvt.o projection.o clip.o attribute.o jsonpull/jsonpull.o evaluator.o read_json.o clipper2/src/clipper.engine.o
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
tippecanoe-overzoom: overzoom.o mvt.o clip.o evaluator.o jsonpull/jsonpull.o text.o attribute.o read_json.o projection.o read_json.o usage.o clipper2/src/clipper.engine.o
$(CXX) $(PG) $(LIBS) $(FINAL_FLAGS) $(CXXFLAGS) -o $@ $^ $(LDFLAGS) -lm -lz -lsqlite3 -lpthread
-include $(wildcard *.d)
%.o: %.c
$(CC) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CFLAGS) -c -o $@ $<
%.o: %.cpp
$(CXX) -MMD $(PG) $(INCLUDES) $(FINAL_FLAGS) $(CXXFLAGS) -c -o $@ $<
clean:
rm -f ./tippecanoe ./tippecanoe-* ./tile-join ./unit *.o *.d */*.o */*.d tests/**/*.mbtiles tests/**/*.check
indent:
clang-format -i -style="{BasedOnStyle: Google, IndentWidth: 8, UseTab: Always, AllowShortIfStatementsOnASingleLine: false, ColumnLimit: 0, ContinuationIndentWidth: 8, SpaceAfterCStyleCast: true, IndentCaseLabels: false, AllowShortBlocksOnASingleLine: false, AllowShortFunctionsOnASingleLine: false, SortIncludes: false}" $(filter-out flatgeobuf.cpp,$(C)) $(H) jsonpull/*.[ch]
TESTS = $(wildcard tests/*/out/*.json)
SPACE = $(NULL) $(NULL)
test: tippecanoe tippecanoe-decode $(addsuffix .check,$(TESTS)) raw-tiles-test parallel-test radix-sort-test pbf-test join-test enumerate-test decode-test join-filter-test unit json-tool-test allow-existing-test csv-test layer-json-test pmtiles-test decode-pmtiles-test overzoom-test flatgeobuf-test
./unit
suffixes = json json.gz
# Work around Makefile and filename punctuation limits:
# _ for argument-separator space
# %20 for quoted space
# %22 for quoted quote
# %2f for /
# %3a for :
# %5f for _
# %7b for {
testargs = \
$(subst %20,' ',\
$(subst %22,'"',\
$(subst %3a,:,\
$(subst %2f,/,\
$(subst %7b,'{',\
$(subst %5f,'_',\
$(subst _, ,$(1))))))))
%.json.check:
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.check,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix)))) < /dev/null
./tippecanoe-decode -x generator $@.mbtiles > $@.out
cmp $@.out $(patsubst %.check,%,$@)
rm $@.out $@.mbtiles
# Don't test overflow with geobuf, because it fails (https://github.com/mapbox/geobuf/issues/87)
# Don't test stringids with geobuf, because it fails
nogeobuf = tests/overflow/out/-z0.json $(wildcard tests/stringid/out/*.json)
geobuf-test: tippecanoe-json-tool $(addsuffix .checkbuf,$(filter-out $(nogeobuf),$(TESTS)))
# For quicker address sanitizer build, hope that regular JSON parsing is tested enough by parallel and join tests
fewer-tests: tippecanoe tippecanoe-decode geobuf-test raw-tiles-test parallel-test radix-sort-test pbf-test join-test enumerate-test decode-test join-filter-test unit
# XXX Use proper makefile rules instead of a for loop
%.json.checkbuf:
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json); do ./tippecanoe-json-tool -w $$i | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
for i in $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.json.gz); do gzip -dc $$i | ./tippecanoe-json-tool -w | ./node_modules/geobuf/bin/json2geobuf > $$i.geobuf; done
./tippecanoe -q -a@ -f -o $@.mbtiles $(call testargs,$(patsubst %.json.checkbuf,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(addsuffix .geobuf,$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))) < /dev/null
./tippecanoe-decode -x generator $@.mbtiles | sed 's/checkbuf/check/g' | sed 's/\.geobuf//g' > $@.out
cmp $@.out $(patsubst %.checkbuf,%,$@)
rm $@.out $@.mbtiles
# The result of the sort must not depend on how the sort was performed, so instead of
# checking the sorted output against an expected copy of it, check that sorting by radix
# produces the same tiles as sorting in memory. --prefer-radix-sort lowers the memory
# limit to 8K, which radix() then halves again, so the radix subdivision has to recurse
# until each bucket is under 4K. How deeply that recurses depends on how many files the
# machine will let us open at once, but the sorted result is the same either way, so
# this comparison doesn't depend on that.
#
# What sends the sort down its rarely-taken paths is the shape of the input rather than
# the size of it: a feature whose geometry alone is bigger than the memory limit is
# sorted as a bucket of its own, and features that share a long run of leading index
# bits have to be subdivided until there are no bits left. The first two inputs are
# each one of those on purpose -- several separated features too big to sort in memory,
# and many features at one location -- and the rest are for breadth.
radix-sort-test: tippecanoe tippecanoe-decode
mkdir -p tests/radix-sort
perl -e 'for ($$f = 0; $$f < 8; $$f++) { print "{ \"type\": \"Feature\", \"properties\": { \"f\": $$f }, \"geometry\": { \"type\": \"LineString\", \"coordinates\": ["; for ($$i = 0; $$i < 2000; $$i++) { print "," unless $$i == 0; printf "[%f,%f]", $$f * 40 - 175 + $$i * 0.001, $$i % 2 * 0.5 - 20; } print "] } }\n"; }' > tests/radix-sort/bigfeatures.json
perl -e 'for ($$i = 0; $$i < 500; $$i++) { print "{ \"type\": \"Feature\", \"properties\": { \"i\": $$i }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ 17, 42 ] } }\n"; }' > tests/radix-sort/onelocation.json
$(MAKE) radix-sort-compare RADIXIN="tests/radix-sort/bigfeatures.json" RADIXARGS="-z4"
$(MAKE) radix-sort-compare RADIXIN="tests/radix-sort/onelocation.json" RADIXARGS="-z4"
$(MAKE) radix-sort-compare RADIXIN="tests/feature-filter/in.json" RADIXARGS="-z4"
$(MAKE) radix-sort-compare RADIXIN="tests/ne_110m_ocean/in.json" RADIXARGS="-z4"
$(MAKE) radix-sort-compare RADIXIN="tests/border/in.json" RADIXARGS="-z4"
$(MAKE) radix-sort-compare RADIXIN="tests/loop/in.json" RADIXARGS="-z4"
$(MAKE) radix-sort-compare RADIXIN="tests/tl_2022_11_tract/in.json.gz" RADIXARGS="-z4"
$(MAKE) radix-sort-compare RADIXIN="tests/epsg-3857/in.json" RADIXARGS="-z4 -sEPSG:3857"
rm -r tests/radix-sort
radix-sort-compare:
./tippecanoe -q -f $(RADIXARGS) -o tests/radix-sort/memory.mbtiles $(RADIXIN)
./tippecanoe -q -f $(RADIXARGS) -aR -o tests/radix-sort/radix.mbtiles $(RADIXIN)
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/radix-sort/memory.mbtiles > tests/radix-sort/memory.json
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/radix-sort/radix.mbtiles > tests/radix-sort/radix.json
cmp tests/radix-sort/memory.json tests/radix-sort/radix.json
rm tests/radix-sort/memory.mbtiles tests/radix-sort/radix.mbtiles tests/radix-sort/memory.json tests/radix-sort/radix.json
parallel-test: $(eval SHELL:=$(ADVSHELL))
mkdir -p tests/parallel
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$k = rand(1); $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { \"yes\": \"no\", \"who\": 1, \"$$k\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in1.json
perl -e 'for ($$i = 0; $$i < 300000; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in2.json
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; print "{ \"type\": \"Feature\", \"properties\": { }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in3.json
perl -e 'for ($$i = 0; $$i < 20; $$i++) { $$lon = rand(360) - 180; $$lat = rand(180) - 90; $$v = rand(1); print "{ \"type\": \"Feature\", \"properties\": { }, \"tippecanoe\": { \"layer\": \"$$v\" }, \"geometry\": { \"type\": \"Point\", \"coordinates\": [ $$lon, $$lat ] } }\n"; }' > tests/parallel/in4.json
echo -n "" > tests/parallel/empty1.json
echo "" > tests/parallel/empty2.json
./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-file.mbtiles tests/parallel/in[1234].json tests/parallel/empty[12].json
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/linear-pipe.mbtiles
cat tests/parallel/in[1234].json | ./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipe.mbtiles
cat tests/parallel/in[1234].json | sed 's/^/@/' | tr '@' '\036' | ./tippecanoe -q -z5 -f -pi -l test -n test -o tests/parallel/implicit-pipe.mbtiles
./tippecanoe -q -z5 -f -pi -l test -n test -P -o tests/parallel/parallel-pipes.mbtiles <(cat tests/parallel/in1.json) <(cat tests/parallel/empty1.json) <(cat tests/parallel/empty2.json) <(cat tests/parallel/in2.json) /dev/null <(cat tests/parallel/in3.json) <(cat tests/parallel/in4.json)
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-file.mbtiles > tests/parallel/linear-file.json
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-file.mbtiles > tests/parallel/parallel-file.json
./tippecanoe-decode -x generator -x generator_options tests/parallel/linear-pipe.mbtiles > tests/parallel/linear-pipe.json
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipe.mbtiles > tests/parallel/parallel-pipe.json
./tippecanoe-decode -x generator -x generator_options tests/parallel/implicit-pipe.mbtiles > tests/parallel/implicit-pipe.json
./tippecanoe-decode -x generator -x generator_options tests/parallel/parallel-pipes.mbtiles > tests/parallel/parallel-pipes.json
cmp tests/parallel/linear-file.json tests/parallel/parallel-file.json
cmp tests/parallel/linear-file.json tests/parallel/linear-pipe.json
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipe.json
cmp tests/parallel/linear-file.json tests/parallel/implicit-pipe.json
cmp tests/parallel/linear-file.json tests/parallel/parallel-pipes.json
rm tests/parallel/*.mbtiles tests/parallel/*.json
raw-tiles-test: tippecanoe tippecanoe-decode tile-join
./tippecanoe -q -f -e tests/raw-tiles/raw-tiles -r1 -pC tests/raw-tiles/hackspots.geojson
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles.json.check
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
# Test that -z and -Z work in tippecanoe-decode
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles > tests/raw-tiles/raw-tiles-z67.json.check
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
# Test that -z and -Z work in tile-join
./tile-join -q -f -Z6 -z7 -e tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67 > tests/raw-tiles/raw-tiles-z67-join.json.check
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
rm -rf tests/raw-tiles/raw-tiles tests/raw-tiles/raw-tiles-z67 tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
# Test that metadata.json is created even if all features are clipped away
./tippecanoe -q -f -e tests/raw-tiles/nothing tests/raw-tiles/nothing.geojson
./tippecanoe-decode -x generator tests/raw-tiles/nothing > tests/raw-tiles/nothing.json.check
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
rm -r tests/raw-tiles/nothing tests/raw-tiles/nothing.json.check
pmtiles-test: tippecanoe tippecanoe-decode tile-join
./tippecanoe -q -f -o tests/pmtiles/hackspots.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
./tippecanoe-decode -x generator tests/pmtiles/hackspots.pmtiles > tests/pmtiles/hackspots.json.check
cmp tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.json
# Test generating pmtiles first and then converting to mbtiles with tile-join.
./tile-join -q -f -pC -o tests/pmtiles/joined.mbtiles tests/pmtiles/hackspots.pmtiles
./tippecanoe-decode -x generator tests/pmtiles/joined.mbtiles > tests/pmtiles/joined.json.check
cmp tests/pmtiles/joined.json.check tests/pmtiles/joined.json
rm -r tests/pmtiles/hackspots.json.check tests/pmtiles/hackspots.pmtiles
# Test generating mbtiles first and then converting to pmtiles with tile-join. (Changes bounds)
./tippecanoe -q -f -o tests/pmtiles/hackspots.mbtiles -r1 -pC tests/raw-tiles/hackspots.geojson
./tile-join -q -f -pC -o tests/pmtiles/joined.pmtiles tests/pmtiles/hackspots.mbtiles
# decode changes order (ZXY vs TMS order)
./tippecanoe-decode -x generator tests/pmtiles/joined.pmtiles > tests/pmtiles/joined_reordered.json.check
cmp tests/pmtiles/joined_reordered.json.check tests/pmtiles/joined_reordered.json
rm -r tests/pmtiles/joined_reordered.json.check tests/pmtiles/hackspots.mbtiles tests/pmtiles/joined.pmtiles
# From raw-tiles-test:
./tippecanoe -q -f -o tests/raw-tiles/raw-tiles.pmtiles -r1 -pC tests/raw-tiles/hackspots.geojson
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles.json.check
cmp tests/raw-tiles/raw-tiles.json.check tests/raw-tiles/raw-tiles.json
# Test that -z and -Z work in tippecanoe-decode
./tippecanoe-decode -x generator -Z6 -z7 tests/raw-tiles/raw-tiles.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67.json.check
cmp tests/raw-tiles/raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67.json
# Test that -z and -Z work in tile-join
./tile-join -q -f -Z6 -z7 -o tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.pmtiles
./tippecanoe-decode -x generator tests/raw-tiles/raw-tiles-z67.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/raw-tiles-z67-join.json.check
cmp tests/raw-tiles/raw-tiles-z67-join.json.check tests/raw-tiles/raw-tiles-z67-join.json
rm -rf tests/raw-tiles/raw-tiles.pmtiles tests/raw-tiles/raw-tiles-z67.pmtiles tests/raw-tiles/raw-tiles.json.check raw-tiles-z67.json.check tests/raw-tiles/raw-tiles-z67-join.json.check
# Test that metadata.json is created even if all features are clipped away
./tippecanoe -q -f -o tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.geojson
./tippecanoe-decode -x generator tests/raw-tiles/nothing.pmtiles | sed 's/\.pmtiles//g' | sed 's/ -o / -e /g' > tests/raw-tiles/nothing.json.check
cmp tests/raw-tiles/nothing.json.check tests/raw-tiles/nothing.json
rm -r tests/raw-tiles/nothing.pmtiles tests/raw-tiles/nothing.json.check
decode-test: tippecanoe tippecanoe-decode
mkdir -p tests/muni/decode
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.mbtiles tests/muni/*.json
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.json.check
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.integer.json.check
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.fraction.json.check
./tippecanoe-decode -x generator -c tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.pipeline.json.check
./tippecanoe-decode -x generator tests/muni/decode/multi.mbtiles 11 327 791 > tests/muni/decode/multi.mbtiles.onetile.json.check
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.mbtiles > tests/muni/decode/multi.mbtiles.stats.json.check
cmp tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles.json
cmp tests/muni/decode/multi.mbtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
cmp tests/muni/decode/multi.mbtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
cmp tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
cmp tests/muni/decode/multi.mbtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
cmp tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
rm -f tests/muni/decode/multi.mbtiles.json.check tests/muni/decode/multi.mbtiles tests/muni/decode/multi.mbtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.stats.json.check tests/muni/decode/multi.mbtiles.onetile.json.check
decode-pmtiles-test: tippecanoe tippecanoe-decode
mkdir -p tests/muni/decode
./tippecanoe -q -z11 -Z11 -f -o tests/muni/decode/multi.pmtiles tests/muni/*.json
./tippecanoe-decode -x generator -l subway tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.json.check
./tippecanoe-decode -x generator -l subway --integer tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.integer.json.check
./tippecanoe-decode -x generator -l subway --fraction tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.fraction.json.check
./tippecanoe-decode -x generator -c tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.pipeline.json.check
./tippecanoe-decode -x generator tests/muni/decode/multi.pmtiles 11 327 791 | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.onetile.json.check
./tippecanoe-decode -x generator --stats tests/muni/decode/multi.pmtiles | sed 's/pmtiles/mbtiles/g' > tests/muni/decode/multi.pmtiles.stats.json.check
cmp tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.mbtiles.json
cmp tests/muni/decode/multi.pmtiles.integer.json.check tests/muni/decode/multi.mbtiles.integer.json
cmp tests/muni/decode/multi.pmtiles.fraction.json.check tests/muni/decode/multi.mbtiles.fraction.json
cmp tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.mbtiles.pipeline.json
cmp tests/muni/decode/multi.pmtiles.onetile.json.check tests/muni/decode/multi.mbtiles.onetile.json
cmp tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.mbtiles.stats.json
rm -f tests/muni/decode/multi.pmtiles.json.check tests/muni/decode/multi.pmtiles tests/muni/decode/multi.pmtiles.pipeline.json.check tests/muni/decode/multi.pmtiles.stats.json.check tests/muni/decode/multi.pmtiles.onetile.json.check
pbf-test: tippecanoe-decode
./tippecanoe-decode -x generator tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.vector.pbf.out
cmp tests/pbf/11-328-791.json tests/pbf/11-328-791.vector.pbf.out
rm tests/pbf/11-328-791.vector.pbf.out
./tippecanoe-decode -x generator -s EPSG:3857 tests/pbf/11-328-791.vector.pbf 11 328 791 > tests/pbf/11-328-791.3857.vector.pbf.out
cmp tests/pbf/11-328-791.3857.json tests/pbf/11-328-791.3857.vector.pbf.out
rm tests/pbf/11-328-791.3857.vector.pbf.out
enumerate-test: tippecanoe tippecanoe-enumerate
./tippecanoe -q -z5 -f -o tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
./tippecanoe-enumerate tests/ne_110m_admin_0_countries/out/enum.mbtiles > tests/ne_110m_admin_0_countries/out/enum.check
cmp tests/ne_110m_admin_0_countries/out/enum.check tests/ne_110m_admin_0_countries/out/enum
rm tests/ne_110m_admin_0_countries/out/enum.mbtiles tests/ne_110m_admin_0_countries/out/enum.check
overzoom-test: tippecanoe-overzoom
# Basic operation
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
# Make sure feature order is stable
# Large -b20 tile buffer to prevent altering the geometries by clipping
./tippecanoe-overzoom -b20 --preserve-input-order -o tests/pbf/11-327-791-out.pbf tests/pbf/11-327-791.pbf 11/327/791 11/327/791
./tippecanoe-decode tests/pbf/11-327-791.pbf 11 327 791 > tests/pbf/11-327-791.json
./tippecanoe-decode tests/pbf/11-327-791-out.pbf 11 327 791 > tests/pbf/11-327-791-out.json
cmp tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json
rm tests/pbf/11-327-791.json tests/pbf/11-327-791-out.json tests/pbf/11-327-791-out.pbf
# Basic operation, multiple input form
./tippecanoe-overzoom -o tests/pbf/13-1310-3166.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791
./tippecanoe-decode tests/pbf/13-1310-3166.pbf 13 1310 3166 > tests/pbf/13-1310-3166.pbf.json.check
cmp tests/pbf/13-1310-3166.pbf.json.check tests/pbf/13-1310-3166.pbf.json
rm tests/pbf/13-1310-3166.pbf tests/pbf/13-1310-3166.pbf.json.check
# Multiple inputs, no compression
./tippecanoe-overzoom --no-tile-compression -o tests/pbf/13-1310-3166-ne.pbf -t 13/1310/3166 tests/pbf/11-327-791.pbf 11/327/791 tests/pbf/0-0-0.pbf 0/0/0
./tippecanoe-decode tests/pbf/13-1310-3166-ne.pbf 13 1310 3166 > tests/pbf/13-1310-3166-ne.pbf.json.check
cmp tests/pbf/13-1310-3166-ne.pbf.json.check tests/pbf/13-1310-3166-ne.pbf.json
rm tests/pbf/13-1310-3166-ne.pbf tests/pbf/13-1310-3166-ne.pbf.json.check
# Different detail and buffer, and attribute stripping
./tippecanoe-overzoom -d8 -b30 -y NAME -y name -y scalerank -o tests/pbf/13-1310-3166-8-30.pbf tests/pbf/11-327-791.pbf 11/327/791 13/1310/3166
./tippecanoe-decode tests/pbf/13-1310-3166-8-30.pbf 13 1310 3166 > tests/pbf/13-1310-3166-8-30.pbf.json.check
cmp tests/pbf/13-1310-3166-8-30.pbf.json.check tests/pbf/13-1310-3166-8-30.pbf.json
rm tests/pbf/13-1310-3166-8-30.pbf tests/pbf/13-1310-3166-8-30.pbf.json.check
# No features in child tile
./tippecanoe-overzoom -o tests/pbf/14-2616-6331.pbf tests/pbf/11-327-791.pbf 11/327/791 14/2616/6331
cmp tests/pbf/14-2616-6331.pbf /dev/null
rm tests/pbf/14-2616-6331.pbf
# Thinning
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
# 9 of them survive as the best of each cluster of 30
# ./tippecanoe -z1 -r30 --retain-points-multiplier 30 -f -e out.dir tests/ne_110m_populated_places/in.json
# cp out.dir/0/0/0.pbf tests/pbf/0-0-0-pop.pbf
./tippecanoe-overzoom -y NAME -m -o tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/pbf/0-0-0-pop-filtered.pbf 0 0 0 > tests/pbf/0-0-0-pop-filtered.pbf.json.check
cmp tests/pbf/0-0-0-pop-filtered.pbf.json.check tests/pbf/0-0-0-pop-filtered.pbf.json
rm tests/pbf/0-0-0-pop-filtered.pbf tests/pbf/0-0-0-pop-filtered.pbf.json.check
# Thinning with accumulation
./tippecanoe-overzoom -y NAME -m --accumulate-attribute NAME:comma -o tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/pbf/0-0-0-pop-accum.pbf 0 0 0 > tests/pbf/0-0-0-pop-accum.pbf.json.check
cmp tests/pbf/0-0-0-pop-accum.pbf.json.check tests/pbf/0-0-0-pop-accum.pbf.json
rm tests/pbf/0-0-0-pop-accum.pbf tests/pbf/0-0-0-pop-accum.pbf.json.check
# Filtering
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
# 27 of them match the filter and are retained
./tippecanoe-overzoom -y NAME -j'{"*":["==","SCALERANK",0]}' -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
# Same filter test, but reading the filter from a file
./tippecanoe-overzoom -y NAME -J tests/pbf/scalerank-0-filter.json -o tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/pbf/0-0-0-pop-expr.pbf 0 0 0 > tests/pbf/0-0-0-pop-expr.pbf.json.check
cmp tests/pbf/0-0-0-pop-expr.pbf.json.check tests/pbf/0-0-0-pop-expr.pbf.json
rm tests/pbf/0-0-0-pop-expr.pbf tests/pbf/0-0-0-pop-expr.pbf.json.check
# Filtering with multiplier
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
# 8 features survive into the output, from 9 clusters of 30
./tippecanoe-overzoom -y NAME -y SCALERANK -j'{"*":["==","SCALERANK",0]}' -m -o tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/pbf/0-0-0-filter-mult.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult.pbf.json.check
cmp tests/pbf/0-0-0-filter-mult.pbf.json.check tests/pbf/0-0-0-filter-mult.pbf.json
rm tests/pbf/0-0-0-filter-mult.pbf tests/pbf/0-0-0-filter-mult.pbf.json.check
# Filtering with multiplier and preserve-input-order
# 243 features in the source tile tests/pbf/0-0-0-pop.pbf
./tippecanoe-overzoom -y NAME -y SCALERANK -y LATITUDE -j'{"*":[">","LATITUDE",40]}' -m --preserve-input-order -o tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-pop.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/pbf/0-0-0-filter-mult-order.pbf 0 0 0 > tests/pbf/0-0-0-filter-mult-order.pbf.json.check
cmp tests/pbf/0-0-0-filter-mult-order.pbf.json.check tests/pbf/0-0-0-filter-mult-order.pbf.json
rm tests/pbf/0-0-0-filter-mult-order.pbf tests/pbf/0-0-0-filter-mult-order.pbf.json.check
# Test that overzooming with a multiplier exactly reverses the effect of tiling with a multiplier
./tippecanoe -q -z5 --preserve-point-density-threshold 8 --retain-points-multiplier 3 -f -e tests/muni/out/out.dir tests/muni/muni.json
./tippecanoe -q -z5 --preserve-point-density-threshold 8 -f -o tests/muni/out/out.mbtiles tests/muni/muni.json
./tippecanoe-overzoom -m -o tests/muni/out/out.dir/000.pbf tests/muni/out/out.dir/0/0/0.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/muni/out/out.mbtiles 0 0 0 > tests/muni/out/out.dir/direct.json
./tippecanoe-decode tests/muni/out/out.dir/000.pbf 0 0 0 > tests/muni/out/out.dir/overzoomed.json
cmp tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
rm -rf tests/muni/out/out.dir tests/muni/out/out.mbtiles tests/muni/out/out.dir/overzoomed.json tests/muni/out/out.dir/direct.json
# Tiny polygon reduction
./tippecanoe-overzoom --line-simplification=5 --tiny-polygon-size=50 -o tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf 0/0/0 0/0/0
./tippecanoe-decode tests/pbf/countries-0-0-0.pbf.out 0 0 0 > tests/pbf/countries-0-0-0.pbf.out.json.check
cmp tests/pbf/countries-0-0-0.pbf.out.json.check tests/pbf/countries-0-0-0.pbf.out.json
rm tests/pbf/countries-0-0-0.pbf.out tests/pbf/countries-0-0-0.pbf.out.json.check
# Deduplication by feature ID
./tippecanoe -z0 -f -e tests/pbf/1.json.dir -l layer tests/pbf/1.json
./tippecanoe -z0 -f -e tests/pbf/2.json.dir -l layer tests/pbf/2.json
./tippecanoe-overzoom -b0 -o tests/pbf/merged-nodedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
./tippecanoe-decode tests/pbf/merged-nodedup.pbf 1 1 0 > tests/pbf/merged-nodedup.pbf.json.check
cmp tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-nodedup.pbf.json
./tippecanoe-overzoom -b0 --deduplicate-by-id -o tests/pbf/merged-dedup.pbf -t 1/1/0 tests/pbf/1.json.dir/0/0/0.pbf 0/0/0 tests/pbf/2.json.dir/0/0/0.pbf 0/0/0
./tippecanoe-decode tests/pbf/merged-dedup.pbf 1 1 0 > tests/pbf/merged-dedup.pbf.json.check
cmp tests/pbf/merged-dedup.pbf.json.check tests/pbf/merged-dedup.pbf.json
rm -r tests/pbf/1.json.dir tests/pbf/2.json.dir tests/pbf/merged-nodedup.pbf tests/pbf/merged-nodedup.pbf.json.check tests/pbf/merged-dedup.pbf.json.check
join-test: tippecanoe tippecanoe-decode tile-join
./tippecanoe -q -f -z12 -o tests/join-population/tabblock_06001420.mbtiles -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur tests/join-population/macarthur.json
./tile-join -q -f -Z6 -z9 -o tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur.mbtiles
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9.mbtiles > tests/join-population/macarthur-6-9.mbtiles.json.check
cmp tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles.json
./tile-join -q -f -Z6 -z9 -X -o tests/join-population/macarthur-6-9-exclude.mbtiles tests/join-population/macarthur.mbtiles
./tippecanoe-decode -x generator tests/join-population/macarthur-6-9-exclude.mbtiles > tests/join-population/macarthur-6-9-exclude.mbtiles.json.check
cmp tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles.json
rm -f tests/join-population/macarthur-6-9.mbtiles.json.check tests/join-population/macarthur-6-9.mbtiles tests/join-population/macarthur-6-9-exclude.mbtiles.json.check tests/join-population/macarthur-6-9-exclude.mbtiles
./tippecanoe -q -f -d10 -D10 -Z9 -z11 -o tests/join-population/macarthur2.mbtiles -l macarthur tests/join-population/macarthur2.json
./tile-join --quiet --force -o tests/join-population/joined.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
./tile-join --quiet --force -o tests/join-population/joined-null.mbtiles --empty-csv-columns-are-null -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
./tile-join --quiet --force --no-tile-stats -o tests/join-population/joined-no-tile-stats.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
./tile-join --quiet --force --tile-stats-attributes-limit=1 -o tests/join-population/joined-tile-stats-attributes-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
./tile-join --quiet --force --tile-stats-sample-values-limit=1 -o tests/join-population/joined-tile-stats-sample-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
./tile-join --quiet --force --tile-stats-values-limit=1 -o tests/join-population/joined-tile-stats-values-limit.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
./tile-join -q -f -i -o tests/join-population/joined-i.mbtiles -x GEOID10 -c tests/join-population/population.csv tests/join-population/tabblock_06001420.mbtiles
./tile-join -q -f -o tests/join-population/merged.mbtiles tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows.mbtiles tests/join-population/macarthur.mbtiles
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined.mbtiles > tests/join-population/joined.mbtiles.json.check
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-null.mbtiles > tests/join-population/joined-null.mbtiles.json.check
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-no-tile-stats.mbtiles > tests/join-population/joined-no-tile-stats.mbtiles.json.check
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-attributes-limit.mbtiles > tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-values-limit.mbtiles > tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check
./tippecanoe-decode -x generator --maximum-zoom=11 --minimum-zoom=4 tests/join-population/joined-tile-stats-sample-values-limit.mbtiles > tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check
./tippecanoe-decode -x generator tests/join-population/joined-i.mbtiles > tests/join-population/joined-i.mbtiles.json.check
./tippecanoe-decode -x generator tests/join-population/merged.mbtiles > tests/join-population/merged.mbtiles.json.check
./tippecanoe-decode -x generator tests/join-population/windows.mbtiles > tests/join-population/windows.mbtiles.json.check
cmp tests/join-population/joined.mbtiles.json.check tests/join-population/joined.mbtiles.json
cmp tests/join-population/joined-null.mbtiles.json.check tests/join-population/joined-null.mbtiles.json
cmp tests/join-population/joined-no-tile-stats.mbtiles.json.check tests/join-population/joined-no-tile-stats.mbtiles.json
cmp tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json.check tests/join-population/joined-tile-stats-attributes-limit.mbtiles.json
cmp tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-sample-values-limit.mbtiles.json
cmp tests/join-population/joined-tile-stats-values-limit.mbtiles.json.check tests/join-population/joined-tile-stats-values-limit.mbtiles.json
cmp tests/join-population/joined-i.mbtiles.json.check tests/join-population/joined-i.mbtiles.json
cmp tests/join-population/merged.mbtiles.json.check tests/join-population/merged.mbtiles.json
cmp tests/join-population/windows.mbtiles.json.check tests/join-population/windows.mbtiles.json
rm -f tests/join-population/joined-null.mbtiles tests/join-population/joined-null.mbtiles.json.check
./tile-join -q -f -l macarthur -n "macarthur name" -N "macarthur description" -A "macarthur's attribution" -o tests/join-population/just-macarthur.mbtiles tests/join-population/merged.mbtiles
./tile-join -q -f -L macarthur -o tests/join-population/no-macarthur.mbtiles tests/join-population/merged.mbtiles
./tippecanoe-decode -x generator tests/join-population/just-macarthur.mbtiles > tests/join-population/just-macarthur.mbtiles.json.check
./tippecanoe-decode -x generator tests/join-population/no-macarthur.mbtiles > tests/join-population/no-macarthur.mbtiles.json.check
cmp tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/just-macarthur.mbtiles.json
cmp tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json
./tile-join -q --no-tile-compression -f -e tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
./tippecanoe-decode -x generator tests/join-population/raw-merged-folder > tests/join-population/raw-merged-folder.json.check
cmp tests/join-population/raw-merged-folder.json.check tests/join-population/raw-merged-folder.json
rm -f tests/join-population/raw-merged-folder.json.check
./tippecanoe -q -z12 -f -e tests/join-population/tabblock_06001420-folder -YALAND10:'Land area' -L'{"file": "tests/join-population/tabblock_06001420.json", "description": "population"}'
./tippecanoe -q -Z5 -z10 -f -e tests/join-population/macarthur-folder -l macarthur tests/join-population/macarthur.json
./tippecanoe -q -d10 -D10 -Z9 -z11 -f -e tests/join-population/macarthur2-folder -l macarthur tests/join-population/macarthur2.json
./tile-join -q -f -o tests/join-population/merged-folder.mbtiles tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
./tippecanoe-decode -x generator tests/join-population/merged-folder.mbtiles > tests/join-population/merged-folder.mbtiles.json.check
cmp tests/join-population/merged-folder.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-mbtiles-to-folder tests/join-population/tabblock_06001420.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
./tile-join -q -n "merged name" -N "merged description" -f -e tests/join-population/merged-folders-to-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-mbtiles-to-folder > tests/join-population/merged-mbtiles-to-folder.json.check
./tippecanoe-decode -x generator -x generator_options tests/join-population/merged-folders-to-folder > tests/join-population/merged-folders-to-folder.json.check
cmp tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
rm -f tests/join-population/merged-mbtiles-to-folder.json.check tests/join-population/merged-folders-to-folder.json.check
./tile-join -q -f -c tests/join-population/windows.csv -o tests/join-population/windows-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
./tile-join -q -c tests/join-population/windows.csv -f -e tests/join-population/windows-merged-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
./tile-join -q -f -o tests/join-population/windows-merged2.mbtiles tests/join-population/windows-merged-folder
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged.mbtiles > tests/join-population/windows-merged.mbtiles.json.check
./tippecanoe-decode -x generator -x generator_options tests/join-population/windows-merged2.mbtiles > tests/join-population/windows-merged2.mbtiles.json.check
cmp tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
./tile-join -q -f -e tests/join-population/macarthur-and-macarthur2-folder tests/join-population/macarthur.mbtiles tests/join-population/macarthur2-folder
./tile-join -q -f -o tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-folder
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged.mbtiles > tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check
./tippecanoe-decode -x generator -x generator_options tests/join-population/macarthur-and-macarthur2-merged2.mbtiles > tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
cmp tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
rm tests/join-population/tabblock_06001420.mbtiles tests/join-population/joined.mbtiles tests/join-population/joined-i.mbtiles tests/join-population/joined.mbtiles.json.check tests/join-population/joined-i.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/merged.mbtiles tests/join-population/merged.mbtiles.json.check tests/join-population/merged-folder.mbtiles tests/join-population/macarthur2.mbtiles tests/join-population/windows.mbtiles tests/join-population/windows-merged.mbtiles tests/join-population/windows-merged2.mbtiles tests/join-population/windows.mbtiles.json.check tests/join-population/just-macarthur.mbtiles tests/join-population/no-macarthur.mbtiles tests/join-population/just-macarthur.mbtiles.json.check tests/join-population/no-macarthur.mbtiles.json.check tests/join-population/merged-folder.mbtiles.json.check tests/join-population/windows-merged.mbtiles.json.check tests/join-population/windows-merged2.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged.mbtiles tests/join-population/macarthur-and-macarthur2-merged2.mbtiles tests/join-population/macarthur-and-macarthur2-merged.mbtiles.json.check tests/join-population/macarthur-and-macarthur2-merged2.mbtiles.json.check
rm -rf tests/join-population/raw-merged-folder tests/join-population/tabblock_06001420-folder tests/join-population/macarthur-folder tests/join-population/macarthur2-folder tests/join-population/merged-mbtiles-to-folder tests/join-population/merged-folders-to-folder tests/join-population/windows-merged-folder tests/join-population/macarthur-and-macarthur2-folder
# Test renaming of layers
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
./tippecanoe -q -f -Z5 -z10 -o tests/join-population/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/join-population/renamed.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
./tippecanoe-decode -x generator tests/join-population/renamed.mbtiles > tests/join-population/renamed.mbtiles.json.check
cmp tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json
rm -f tests/join-population/renamed.mbtiles.json.check tests/join-population/renamed.mbtiles.json.check tests/join-population/macarthur.mbtiles tests/join-population/macarthur2.mbtiles
# Make sure the concatenated name isn't too long
./tippecanoe -q -f -z0 -n 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' -o tests/join-population/macarthur.mbtiles tests/join-population/macarthur.json
./tile-join -f -o tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles tests/join-population/macarthur.mbtiles
./tippecanoe-decode -x generator tests/join-population/concat.mbtiles > tests/join-population/concat.mbtiles.json.check
cmp tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles.json
rm tests/join-population/concat.mbtiles.json.check tests/join-population/concat.mbtiles tests/join-population/macarthur.mbtiles
# Test reading list of input files from file
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur.mbtiles -l macarthur1 tests/join-population/macarthur.json
./tippecanoe -q -f -Z5 -z10 -o tests/readfile/macarthur2.mbtiles -l macarthur2 tests/join-population/macarthur2.json
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -o tests/readfile/renamed.mbtiles tests/readfile/macarthur.mbtiles tests/readfile/macarthur2.mbtiles
./tippecanoe-decode -x generator -x generator_options tests/readfile/renamed.mbtiles > tests/readfile/renamed.mbtiles.json.check
./tile-join -q -R macarthur1:one --rename-layer=macarthur2:two -f -r tests/readfile/readfile.list -o tests/readfile/readfile.mbtiles
./tippecanoe-decode -x generator -x generator_options tests/readfile/readfile.mbtiles > tests/readfile/readfile.mbtiles.json.check
cmp tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check
rm tests/readfile/renamed.mbtiles.json.check tests/readfile/readfile.mbtiles.json.check tests/readfile/readfile.mbtiles tests/readfile/renamed.mbtiles
#`
# Make sure empty tilesets work
#
# mbtiles:
./tippecanoe -q -z0 -f -o tests/join-population/empty.mbtiles tests/join-population/empty.json
./tile-join -f -o tests/join-population/empty.out.mbtiles tests/join-population/empty.mbtiles
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.mbtiles > tests/join-population/empty.out.json.check
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
rm -f tests/join-population/empty.mbtiles tests/join-population/empty.out.mbtiles tests/join-population/empty.out.json.check
# pmtiles:
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
./tile-join -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
# pmtiles again, with --overzoom
./tippecanoe -q -z0 -f -o tests/join-population/empty.pmtiles tests/join-population/empty.json
./tile-join --overzoom -f -o tests/join-population/empty.out.pmtiles tests/join-population/empty.pmtiles
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.pmtiles > tests/join-population/empty.out.json.check
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
rm -f tests/join-population/empty.pmtiles tests/join-population/empty.out.pmtiles tests/join-population/empty.out.json.check
# dirtiles:
./tippecanoe -q -z0 -f -e tests/join-population/empty.dirtiles tests/join-population/empty.json
./tile-join -f -e tests/join-population/empty.out.dirtiles tests/join-population/empty.dirtiles
./tippecanoe-decode -x generator -x generator_options -x name -x description tests/join-population/empty.dirtiles > tests/join-population/empty.out.json.check
cmp tests/join-population/empty.out.json.check tests/join-population/empty.out.json
rm -rf tests/join-population/empty.dirtiles tests/join-population/empty.out.dirtiles tests/join-population/empty.out.json.check
#
# Test overzooming of tilesets with different maxzooms
#
mkdir -p tests/ne_110m_ocean/join
./tippecanoe -q -z2 -f -o tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/in.json
./tippecanoe -q -z4 -d8 -y name -f -o tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_admin_0_countries/in.json.gz
./tile-join --overzoom -f -o tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles
./tippecanoe-decode -x generator tests/ne_110m_ocean/join/joined.mbtiles > tests/ne_110m_ocean/join/joined.mbtiles.json.check
cmp tests/ne_110m_ocean/join/joined.mbtiles.json.check tests/ne_110m_ocean/join/joined.mbtiles.json
rm -f tests/ne_110m_ocean/join/ocean.mbtiles tests/ne_110m_ocean/join/countries.mbtiles tests/ne_110m_ocean/join/joined.mbtiles tests/ne_110m_ocean/join/joined.mbtiles.json.check
join-filter-test: tippecanoe tippecanoe-decode tile-join
# Comes out different from the direct tippecanoe run because null attributes are lost
./tippecanoe -q -z0 -f -o tests/feature-filter/out/all.mbtiles tests/feature-filter/in.json
./tile-join -q -J tests/feature-filter/filter -f -o tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
./tippecanoe-decode -x generator tests/feature-filter/out/filtered.mbtiles > tests/feature-filter/out/filtered.json.check
cmp tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.json.standard
rm -f tests/feature-filter/out/filtered.json.check tests/feature-filter/out/filtered.mbtiles tests/feature-filter/out/all.mbtiles
# Test zoom level filtering
./tippecanoe -q -r1 -z8 -f -o tests/feature-filter/out/places.mbtiles tests/ne_110m_populated_places/in.json
./tile-join -q -J tests/feature-filter/places-filter -f -o tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places.mbtiles
./tippecanoe-decode -x generator tests/feature-filter/out/places-filter.mbtiles > tests/feature-filter/out/places-filter.mbtiles.json.check
cmp tests/feature-filter/out/places-filter.mbtiles.json.check tests/feature-filter/out/places-filter.mbtiles.json.standard
rm -f tests/feature-filter/out/places.mbtiles tests/feature-filter/out/places-filter.mbtiles tests/feature-filter/out/places-filter.mbtiles.json.check
json-tool-test: tippecanoe-json-tool
./tippecanoe-json-tool -e GEOID10 tests/join-population/tabblock_06001420.json | sort > tests/join-population/tabblock_06001420.json.sort
./tippecanoe-json-tool -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420.json.sort.joined
./tippecanoe-json-tool --empty-csv-columns-are-null -c tests/join-population/population.csv tests/join-population/tabblock_06001420.json.sort > tests/join-population/tabblock_06001420-null.json.sort.joined
cmp tests/join-population/tabblock_06001420.json.sort.joined tests/join-population/tabblock_06001420.json.sort.joined.standard
cmp tests/join-population/tabblock_06001420-null.json.sort.joined tests/join-population/tabblock_06001420-null.json.sort.joined.standard
rm -f tests/join-population/tabblock_06001420.json.sort tests/join-population/tabblock_06001420.json.sort.joined
rm -f tests/join-population/tabblock_06001420-null.json.sort.joined
allow-existing-test: tippecanoe
# Make a tileset
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
# Writing to existing should fail
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
# Replace existing
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.mbtiles tests/coalesce-tract/tl_2010_06001_tract10.json
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.mbtiles > tests/allow-existing/both.mbtiles.json.check
cmp tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles.json
# Make a tileset
./tippecanoe -q -Z0 -z0 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
# Writing to existing should fail
if ./tippecanoe -q -Z1 -z1 -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
# Replace existing
./tippecanoe -q -Z8 -z9 -f -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
./tippecanoe -q -Z10 -z11 -F -e tests/allow-existing/both.dir tests/coalesce-tract/tl_2010_06001_tract10.json
./tippecanoe-decode -x generator -x generator_options tests/allow-existing/both.dir | sed 's/both\.dir/both.mbtiles/g' > tests/allow-existing/both.dir.json.check
cmp tests/allow-existing/both.dir.json.check tests/allow-existing/both.mbtiles.json
# Make a tileset
./tippecanoe -q -Z0 -z0 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
# Writing to existing should fail
if ./tippecanoe -q -Z1 -z1 -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
# Replace existing
./tippecanoe -q -Z8 -z9 -f -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json
# Allow-existing is not supported for pmtiles
if ./tippecanoe -q -Z10 -z11 -F -o tests/allow-existing/both.pmtiles tests/coalesce-tract/tl_2010_06001_tract10.json; then exit 1; else exit 0; fi
rm -r tests/allow-existing/both.pmtiles tests/allow-existing/both.dir.json.check tests/allow-existing/both.dir tests/allow-existing/both.mbtiles.json.check tests/allow-existing/both.mbtiles
csv-test: tippecanoe tippecanoe-decode
# Reading from named CSV
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles tests/csv/ne_110m_populated_places_simple.csv
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
# Reading from named CSV, with nulls
./tippecanoe -q --empty-csv-columns-are-null -zg -f -o tests/csv/out-null.mbtiles tests/csv/ne_110m_populated_places_simple.csv
./tippecanoe-decode -x generator tests/csv/out-null.mbtiles > tests/csv/out-null.mbtiles.json.check
cmp tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles.json
rm -f tests/csv/out-null.mbtiles.json.check tests/csv/out-null.mbtiles
# Same, but specifying csv with -L format
./tippecanoe -q -zg -f -o tests/csv/out.mbtiles -L'{"file":"", "format":"csv", "layer":"ne_110m_populated_places_simple"}' < tests/csv/ne_110m_populated_places_simple.csv
./tippecanoe-decode -x generator -x generator_options tests/csv/out.mbtiles > tests/csv/out.mbtiles.json.check
cmp tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles.json
rm -f tests/csv/out.mbtiles.json.check tests/csv/out.mbtiles
flatgeobuf-test: tippecanoe tippecanoe-decode
./tippecanoe -q -f -z0 -l numeric-properties -o tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.fgb
./tippecanoe-decode tests/flatgeobuf/numeric-properties.mbtiles 0 0 0 > tests/flatgeobuf/numeric-properties.json.check
cmp tests/flatgeobuf/numeric-properties.json.check tests/flatgeobuf/numeric-properties.json
rm -f tests/flatgeobuf/numeric-properties.mbtiles tests/flatgeobuf/numeric-properties.json.check
layer-json-test: tippecanoe tippecanoe-decode
# GeoJSON with description and named layer
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"tests/ne_110m_populated_places/in.json", "description":"World cities", "layer":"places"}'
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
# Same, but reading from the standard input
./tippecanoe -q -z0 -r1 -yNAME -f -o tests/layer-json/out.mbtiles -L'{"file":"", "description":"World cities", "layer":"places"}' < tests/ne_110m_populated_places/in.json
./tippecanoe-decode -x generator -x generator_options tests/layer-json/out.mbtiles > tests/layer-json/out.mbtiles.json.check
cmp tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles.json
rm -f tests/layer-json/out.mbtiles.json.check tests/layer-json/out.mbtiles
# Use this target to regenerate the standards that the tests are compared against
# after making a change that legitimately changes their output
prep-test: $(TESTS)
tests/%.json: Makefile tippecanoe tippecanoe-decode
./tippecanoe -q -a@ -f -o $@.check.mbtiles $(call testargs,$(patsubst %.json,%,$(word 4,$(subst /, ,$@)))) $(foreach suffix,$(suffixes),$(sort $(wildcard $(subst $(SPACE),/,$(wordlist 1,2,$(subst /, ,$@)))/*.$(suffix))))
./tippecanoe-decode -x generator $@.check.mbtiles > $@
cmp $(patsubst %.check,%,$@) $@
rm $@.check.mbtiles
Reference in New Issue View Git Blame Copy Permalink